Displaying items by tag: Ilen
The east coast of Ireland may have endured vile weather on Saturday, but in West Cork there was almost a touch of sunny spring in the air when the historic restored ketch Ilen completed the final stage of her short but complex journey from the building shed to her shoreside completion berth writes W M Nixon.
Liam Hegarty’s boatyard at Oldcourt is such a crowded place that it required some lateral thinking to work out how to move the Ilen. She weighs well north of 25 tons, and the ultra-simple four wheel trolley ultimately assembled under her is far indeed from the multi-wheel vehicle which had been hinted at as the complex nature of the move became clear.
But doing such things in unusual ways is the norm at Oldcourt, and the absence of a proper slipway to receive Ilen at the access end of the Top Shed had been solved many years ago by bringing her in at high water on Vincent O’Driscoll’s inter-island freight ferry.
It was roll-on, roll-off when Ilen arrived all those years ago, and it was the same again on Saturday. But the old ketch herself has now been born again. And Vincent and his crew have a new ferry, memorably called the Sabrina II.
Having been given full approval by the Top Shed yard cat, the Ilen waited patiently for the right conditions, while inside the shed work got underway on the first stages of the re-build of Ilen’s more famous older but smaller sister, Conor O’Brien’s world-girdling Saoirse.
Came Saturday, the sun rose up, the wind went down, the tide lifted high, and Sabrina II thrust her ramp in under Ilen’s stern and the characterful old ketch was taken on board with style. Then with textbook efficiency, after a very short voyage up the Ilen River, she was taken off the ferry in another part of the yard with the tide at a height that ensured a very smooth progression.
Ilen is now comfortably in the shore berth which she’ll only leave to be put afloat. Meanwhile in Limerick – home base of the Ilen Project – director Gary MacMahon has overseen the assembly of a pre-fabricated roof structure which will be assembled at the yard to protect the Ilen work from the West Cork weather. For even in Oldcourt, the sun doesn’t shine all the time.
The historic 1926-built 56ft trading ketch Ilen has been undergoing a painstaking restoration at Oldcourt near Baltimore in Liam Hegarty's boatyard for several years now for the Ilen Boat-building School, which is directed by Gary MacMahon in Limerick writes W M Nixon. While the heavy boat-building work has been completed in Oldcourt, much else has been built in Limerick, and as December 2017 came to a close, the stage had been reached where it was time to move the historic vessel out of the shed.
A substantial multi-wheel trolley was assembled under the ship – which may weigh as much as 30 tons – and a complicated move to an onshore commissioning berth involving the use of an inter-island ferry was planned for Tuesday January 2nd. But the imminent arrival of Storm Eleanor caused a delay until yesterday (Friday), when the post-storm calm provided ideal conditions, and the slow process finally got under way.
We’ll be carrying a fuller version of this fascinating latest stage in the story of Ilen in the near future on Afloat.ie when the move is completed, but meanwhile here are three photos to show just how very much alive this remarkable new-old ship looked as she emerged into the light from the dark confines of the shed.
When we recall the exposed conditions in which some coastal boat and ship-builders had to work in the days when life and labour were cheap, and health and safety were considered more important for thoroughbred animals than for workers, then it has to be said that that the spar-makers of Limerick assembling the rig for the restoration of the 1926-built 56ft ketch Ilen are creating their finished sections in some comfort in the Ilen Boatbuilding School writes W M Nixon
But though they have a decent amount of space and the benefits of modern equipment, the fact that the Douglas Fir for the new spars has been donated from the stores of the much-lamented Asgard II puts an even greater onus on the team to produce work of world class.
That said, the temptation to stray into the realms of classic yacht style is ever-present when you have wood and facilities of this quality. But it has always to be remembered that Ilen is the sole surviving Irish-built sailing trader of this size and type. Thus Project Director Gary MacMahon has to ensure that the work remains true to traditional workboat style rather than veering towards anything too ornamental.
But as the simple functionality of each spar and fitting which has been made has its own inherent beauty, ornamentation would be superfluous, and as our gallery of photos reveals, in its way each piece is a work of art.
The restoration of classic yachts and traditional craft to the recognised international standard is still relatively new in Ireland writes W M Nixon. In fact, it could be argued that the major project in Dunmore East, completed in 2005 on the 1894 G L Watson-designed 37ft cutter Peggy Bawn, is still the only example we have in Ireland of the painstaking and meticulous research and work of the highest quality that is required on a vessel of this size for total authenticity.
The Peggy Bawn project was for maritime historian Hal Sisk, and while Michael Kennedy was the lead shipwright, many specialist talents were involved in creating a widely-admired masterpiece.
Now Hal Sisk is working on a completely different idea, a revival of the legendary Dublin Bay 21 class, the famous Mylne design of 1902-03. But in this case, far from bringing the original and almost-mythical gaff cutter rig with jackyard topsail back to life above a traditionally-constructed hull, he is content to have an attractive gunter-rigged sloop – “American gaff” some would call it – above a new laminated cold-moulded hull which is being built inverted but will, when finished and upright, be fitted on the original ballast keels, thereby maintaining the boat’s continuity of existence, the presence of the true spirit of the ship..
It’s a fascinating and complex project to which we’ll be returning in future postings on Afloat.ie. For now, the first DB 21 to get this treatment is Naneen, originally built in 1905 by Clancy of Dun Laoghaire for T. Cosby Burrowes, a serial boat owner from Cavan who had formerly owned Nance, the 1899 Dublin Bay 25 which was the only DB25 to be built by designer William Fife’s own yard in Fairlie – she still sails in the Mediterranean, now under the name of Iona.
As for Naneen, she was soon under new ownership as Burrowes interests turned elsewhere. She raced with the class in Dublin Bay under the original gaff rig until 1964, and then under the masthead Bermudan sloop rig, which kept these attractive boats going as an active racing class until August 1986.
In that fateful year, the after-effects of Hurricane Charlie in Dun Laoghaire Harbour resulted in their damaged hulls of the Dublin Bay 21s being retrieved and stored in a Wicklow farmyard while everyone worked out various schemes to make good use of this historic flotilla of seven very significant and attractive boats.
Hal Sisk and DB21 “Guardian” Fionan de Barra, after much research, have now developed this moulded hull/simpler rig philosophy which revives the class while retaining its character. And in Steve Morris at Kilrush in County Clare, they have a skilled boat-builder who has already shown with the Shannon cutter Sally O’Keeffe and other projects that he brings very special talents that work well in a wide variety of boat-building challenges.
However, in order to maintain the integrity of the project, the actual design of the Dublin Bay 21 hull had to be agreed to very close limits, far removed from the free-and-easy approach of boat-builders in the early 1900s. For this, they have been able to draw on the highly-trained skills of designer and classics consultant Paul Spooner, who worked with Duncan Walker’s famous Fairlie Restorations company for twenty years, and has seen through some extremely demanding projects thanks to his fully-qualified status as a naval architect and engineer.
Using Paul Spooner’s drawings, the work in Kilrush has been proceeding steadily since late summer, and in recent days a stage had been reached where Paul Spooner’s presence was required on-site in order to finalise some key decisions. But he’s a very busy man, so to optimize his presence here, Hal Sisk linked-up with Gary MacMahon of the Ilen Project of Limerick and Baltimore, as the riggers developing the restored sail-plan of the 1926-built 56ft Conor O’Brien ketch Ilen had also been seeking Paul’s expert advice on their work.
While logistically challenging, it was all just possible in three recent days, and despite freezing damp weather in the west, Paul Spooner put in useful time in Kilrush where Steve Morris’s work is a joy to behold, and then he was transferred to the care of the Ilen team and whisked from Limerick to Baltimore.
There, in The Old Corn Store in Oldcourt Boatyard where Ilen has been re-born, many assembled parts that we’ve seen recently on Afloat.ie being built in the Ilen Boat-Building School in Limerick has now been fitted in the ship, and here too the Paul Spooner presence brought reassurance that they were working in the right direction.
As for which direction Paul Spooner himself was going, it would have been overly-demanding for any lesser man. But having given advice of gold dust quality to two major restoration projects in Ireland, he then hopped on a plane in Dublin Airport and went to Japan, where he is being consulted on the restoration of a large 1927-vintage Camper & Nicholson ketch. That’s how it is at the leading edge of classic restoration projects.
The process of restoring the 1926-built 56ft Conor O’Brien ketch Ilen in Limerick and Baltimore has seen a countrywide network developing, a network in which anyone with access to redundant classic quality timber has been happy to see it finding a new use in the Ilen Boatbuilding School’s very special project writes W M Nixon.
Afloat.ie recently carried the story of how traditional rigging dead-eyes had been crafted from that rare timber lignum vitae, which in this case had been sourced from a former shipyard in Cork.
Now there has been a useful re-direction from nearer home, with teak which had provided slats for the seating in the old Markets Field Gaelic Stadium in Limerick for more than a century finding a new life as slats on the sole of the Ilen helmsman’s footwell.
A hundred and more years ago, teak – the king of timbers - was much more readily available than it is today, and was sometimes used to excess. But modern boat-builders have learned that with the scarcity of this lovely wood, less can be more, and the way that the relatively small amount of teak has been usefully installed in the beautifully finished Ilen footwell certainly bears this out.
Having made a couple of journeys between the Ilen herself in Oldcourt near Baltimore and the boat-building school in Limerick, the elegant footwell will finally be fully installed on the ship within the next week.
The process of transforming the restored hull and deck of the 1926-built 56ft Conor O’Brien historic ketch Ilen into a living ship continues writes W M Nixon. The programme is co-ordinated and combined between the Ilen Boatbuilding School in Limerick, where they’re busy on the benches making or re-conditioning many items of gear and equipment, and in and around the ship herself with Liam Hegarty in Baltimore in West Cork. There, it finally all comes together, and last weekend provided a real sense of a new stage reached in the project.
Lights gleamed from below where the accommodation is being created, and traditional timberwork shone with warmth in the homely setting of The Old Cornstore on the banks of the Ilen River. This much-loved waterway runs from Skibbereen down towards Baltimore to provide the home training waters of some of Ireland’s greatest contemporary rowers, as well as a sheltered setting for the always-fascinating boatyard complex.
The unique atmosphere of this special boat-building location is more cherished than ever. It had been feared that the Old Cornstore and the surrounding Oldcourt Boatyard were right in the path of serious damage from Storm Ophelia three weeks ago. But although a gust of 191 km/h was recorded out at the Fastnet Rock, and 135 km/h was logged at Sherkin Island just across from Baltimore, Oldcourt came through relatively unscathed. The place leads a charmed life.
As for the ketch’s restoration project, a stage had been reached where teams from both Ilen Boatbuilding centres could usefully combine forces last Saturday to clear up the boat from end to end the better to appreciate what has been achieved, and to appraise what still needs to be done. In comparing the photos below which show Ilen as she was when last in commission at the Glandore Classics of 1998, and as she was on Saturday, there’s no doubting that the spirit of the old ship is being re-born.
As is the way with restorations, it’s intriguing to learn how various specialist items of equipment have been retrieved or saved. In a city with a metal-working tradition like Limerick, there’s an instinctive appreciation of the quality of the workmanship which has gone into the rigging hardware for shrouds and masts alike.
And although we’ve shown photos of the Ilen dead-eyes made from lignum vitae before, there’s something so fascinating about this densest of timbers (in this case “contributed from a former shipyard in Cork”) that a second or third look is surely justified, appreciating them as works of art shaped in the Ilen school in Limerick by Matt Dirr.
As for that rather choice bronze fairlead, we immediately fired back an enquiry to Ilen School Director Gary McMahon as to who made it, for it too is a work of art. The answer is he doesn’t know who made it, but having worked in metal himself he has long been an inveterate collector of special items which would otherwise be on their way to the scrapyard, and this came off an old vessel which was being dismantled in Limerick. Now, thanks to the Ilen Project, it will once again sail the seas.
Many people have dropped by the Old Cornstore on the riverside at Oldcourt in West Cork to see work progressing on the restoration of the 1926 Conor O’Brien ketch Ilen writes WM Nixon. And naturally they’ll have the impression that they’re at the main scene of the action. After all, the 56ft vessel certainly looks the part - a complete ship, full of promise in her distinctive new colour scheme.
But as Gary MacMahon of the Ilen Boatbuilding School in Limerick points out, even with a hefty traditional vessel like Ilen, the finished hull with deck in place is only about 35% of the complete and fully commissioned vessel. And though the assembly of the various parts inevitably has to take place in Oldcourt with Liam Hegarty and his team, much of what you’re looking at on the Ilen today was actually built in the Ilen School’s efficient workshops in Limerick city.
There, young people – indeed, people of all ages and from many backgrounds – are finding that working with wood, and creating parts for boats or building complete boats, is a profoundly interesting and fulfilling experience. In recent years, the Ilen School has turned out impressively authentic versions of the traditional Shannon gandelow, and in a completely different direction, sailing dinghies of the distinctive CityOne class to a very special design by the late Theo Rye.
These smaller craft have been imaginatively used by those who built them for various expeditions to events such as the Baltimore Woodenboat Festival and the Glandore Classics Regatta. And in 2014, the Gandelows somehow managed a remarkable double by taking part in the Thousandth Anniversary re-enactment of the Battle of Clontarf (wasn’t Brian Boru a Limerick man, after all?) and yet somehow also took in a Marine Festival in Venice, as it’s reckoned that the word “gandelow” originated from gondola, but mutated along the way.
Having taken such things and various other projects in their stride, the Ilen people in Limerick have enthusiastically lined up to build the deckhouses, hatchways, skylights, lignum vitae rigging deadeyes and many other items for Ilen herself. Each is an exquisite bit of marine joinerywork in its own right, and when fitted on the ship, they go so well with the overall concept that you’d be hard-pressed to guess that they were built many miles away, in the characterful city on Shannonside, rather than among the rolling green hills and woodland of West Cork.
But such is the case, because for all his fondness for West Cork, Conor O’Brien’s spirit is in Foynes Island on the Shannon Estuary, and Limerick is his city, the city of the O’Briens since time immemorial. And recently, Limerick has been turning out the stanchions for the Ilen’s guard-rails, something which is well in line with the city’s engineering traditions. But most impressive of all is the final work on finishing the spars.
When Ilen was shipped back from the Falklands in 1998, some of her surviving spars were in a decidedly poor conditions. But the new Limerick-built replacements are robust works of art, with a natural functional beauty. It really will be a show on the road, and then some, when they’re taken on that winding journey from Limerick down to Baltimore.
With the hull of the 56ft 1926-built ketch Ilen fully restored in Oldcourt near Baltimore, attention has been turning to detailed items of equipment such as the steering system and the stern gear writes W M Nixon. And the “offering up” of the athwartships cathead, which will support the net under the mighty bowsprit as well as other more traditional functions such as lifting the anchor, has continued the migration of shaped wooden parts from the Ilen Boatbuilding School in Limerick to Liam Hegarty and his shipwrights with the hull in West Cork.
As the historic photo taken from aloft of Ilen’s foredeck in her original form shows, the simplified cathead was one athwartships spar, whereas in larger vessels it could be two spars, one each side, and angled at about 45 degrees to the fore-and-aft line. In Ilen’s case, it was long enough to help in the business of keeping the bowsprit in place, while maximizing the amount of clear space on the foredeck and over the rail.
Overall, attention is now also well focused on working out a friendly layout in the capacious accommodation. Originally, in her days as the freight vessel in the Falkland Islands, the best part of Ilen’s roomy hull amidships was taken up with the cargo hold. The crew quarters were cramped places, either right forward, or crowded in down aft at the little deckhouse.
But with the restoration, the deckhouse is enhanced, and though a classic hatchway has been installed right forward, the team have to take decisions on how best to lay out the amidships below-deck area for a vessel which will have to fill several roles
When fully commissioned again, Ilen will be based in Limerick with her programme built around the Shannon Estuary and further afield. But the plan is to have only seven sleeping bunks rather than the twelve which might be possible if she were going to be used only as a sail training vessel.
While the Ilen project may be all about the restoration of a very traditional vessel, doubtless a non-traditional computer will be used to envisage the best possible use of all that lovely space below. And even when CAD facilities have been utilised, the best plan is to make a mock-up before finalising the details, for even the smallest modification of one part of the layout affects the way that everything else falls into place in a three-dimensional jigsaw puzzle.
It’s worth persevering, for a traditionally-styled yet ergonomically friendly and welcoming layout below would make Ilen the little ship that everyone wants to be aboard.
With the hull of the 56ft 1926-built Conor O’Brien ketch Ilen now restored and painted in the building shed in Oldcourt near Baltimore, attention shifts increasingly to the long list of detail work that is needed to complete the project writes W M Nixon.
Much of this is ideally suited to the facilities available in the Ilen Boat Building School in Limerick, where director Gary MacMahon and his team have assembled a group of all the talents for teaching and learning. These days, the evocative aromas and sounds of traditional ship-building and its associated tasks permeate both the school in the city, and the building shed beside the Ilen River.
Conor O’Brien’s global circumnavigation in the 42ft ketch Saoirse in 1923-25 inspired the Falkland Islanders to ask for a larger sister-ship to the same concept for their inter-island communications vessel, and the resulting Ilen was able - among other things - to transfer up to 200 sheep on the inter-island channels.
With her larger size, she also enabled O’Brien and master shipwright Tom Moynihan of Baltimore to give more space to the steering gear. As O’Brien later admitted, they’d tried to pack so much into Saoirse’s compact 42ft hull that her steering wheel was awkwardly placed for long spells at the helm, so in Ilen they made a point of installing a more substantial arrangement which can now be seen re-created in Limerick.
In both the school in the city and the Old Cornstore in Oldcourt, it’s an immersive maritime experience of being transported back in time to the 1920s and far beyond.
These days, it’s reckoned that chainplates – those vital fittings that attach a sailing boat’s standing rigging to her hull – should be wellnigh invisible writes W M Nixon. Indeed, when you look at some of the latest products of the French marine industry such as Paul O’Higgins’ 2017 Dun Laoghaire-Dingle Race winner, the JPK 10.80 Rockabill VI, the chainplates looks to be so small that you wonder if there isn’t some large hidden structure within to carry the real load.
But modern boat-building in carbon and composites has become so clever and weight-conscious that everything in a new boat is doing at least three things at once. Innovative designers find ways of carrying the loads on sections which also serve as part of the accommodation layout, while hiding the fundamental nature of the real work being done.
However, when the 56ft ketch Ilen was being built by Tom Moynihan and his shipwrights in Baltimore back in 1926, the function of the simple wrought steel chainplates was to transfer the load as visibly as possible over a significant section of the hull, with the chainplates uncompromisingly attached externally to minimise the chance of leaks.
Yacht builders naturally inclined to have their chainplates fitted internally, as that looked so much neater. But Ilen was of a traditional no-nonsense concept, and far from making the chainplates something to be invisible, the blacksmith of Baltimore crafted them to be simple and highly visible works of art.
Yet their seeming simplicity is itself a blind. The chainplates come up over timber channels which guide their load-carrying section clear – though only just – of the bulwarks. It all has to be worked to a very fine tolerance, as Liam Hegarty and his team discovered in recent days in the Old Cornstore at Oldcourt where Ilen’s restoration is shaping up, and the new chainplates – made this time round by specialist Colin Frake – have been fitted in a painstaking process.
Definitely not a job to be rushed. You get only one chance of marrying the chainplates, channels and hull to perfection.