Menu

Ireland's sailing, boating & maritime magazine

Displaying items by tag: TechWorks Marine

Techworks Marine is deploying three surface buoys with single-point moorings for a metocean survey campaign at the site of the proposed Clogherhead Offshore Wind Farm.

It follows a geophysical survey campaign conducted by Alpha Marine this past summer, as previously reported on Afloat.ie.

These deployments are expected to be completed over a two-day period, at the next available weather window from Sunday 6 November, subject to weather and operational constraints.

Once deployed, the met ocean devices will remain on site for a period of up to 12 months.

The survey campaign will be undertaken within the proposed Clogherhead Offshore Wind Farm site, located some 10km from the Co Louth coast. Detailed coordinates and a map of the survey area are included in Marine Notice No 76 of 2022, attached below.

Three yellow buoys will be deployed, each with a hull diameter of 1.2m and a nominal freeboard of 0.7m. The buoys will display a St Andrew’s Cross day mark, and are fitted with a radar reflector and navigation light with a three nautical mile range, flashing a sequence of five flashes every 20 seconds.

Deployment operations will be conducted by the twin-hulled multi-cat work vessel MPV Skua (callsign 2GDE3).

During works, the vessel will be restricted in its ability to manoeuvre so all other vessels are requested to leave a wide berth during the deployment operations. Radio transmissions will be conducted with other seafarers to notify them of the operations.

Published in Power From the Sea

TechWorks Marine plans to deploy four trawl-resistant bottom mounted acoustic Doppler current profilers (ADCP) frames in Castlemaine and Valentia off the coast of Co Kerry from this Monday 7 February.

Weather permitting, the Ocean Navigator (callsign EI018) will deploy the four trawl-resistant, bottom-mounted ADCPs frames — each of around one square metre in area — on the seabed for a minimum of one month and a maximum of two months, between this week and Monday 21 February.

They will be used to carry out water quality sampling surveys as well as vessel-mounted ADCP surveys at the same time as the deployments and these are tide and weather dependent and may cause a slight delay in the recovery of the seabed frames.

The ADCPs will be measuring currents through the water column at each location over the course of their month-long deployment. This data will be used to validate a hydrodynamic model being developed of the area for Irish Water.

There will be no surface marker during the extent of deployment so vessel traffic will not need to avoid the area but should be aware of its presence. Throughout operations, the Ocean Navigator will be displaying appropriate lights and shapes.

Details of the exact locations of the ADCP frames and other information for mariners are included in Marine Notice No 08 of 2022, which can be downloaded below.

Published in News Update

TechWorks Marine has scheduled the deployment of three trawl-resistant acoustic Doppler current profilers (ADCPs) in Tralee Bay from next week.

The three bottom-mounted ADCP frames will be positioned on the seabed at various depths between Monday 1 and Saturday 13 November, weather depending.

If the deployment is delayed due to unsuitable conditions, then it will be carried out on the next viable tide and weather window.

Once deployed, the frames will be on the seabed for a minimum of one calendar month and a maximum of two months, weather permitting.

Map showing the planned ADCP locations in Tralee Bay | Credit: TechWorks MarineMap showing the planned ADCP locations in Tralee Bay | Credit: TechWorks Marine

They are required to carry out water quality sampling surveys and vessel-mounted ADCP surveys at the same time as the deployments. As these are tide and weather dependent, they may cause a slight delay in the recovery of the seabed frames.

The frames will be deployed by the Whispering Hope (callsign EIAR8) which will be restricted in its ability to manoeuvre during this operation.

Vessels operating within this area are requested to keep their distance, maintaining a safety zone around the deployment vessel, and pass at minimum speed to reduce vessel wash.

Details of the exact locations of the ADCP frames and other information for mariners can be found in Marine Notice No 59 of 2021, which can be downloaded below.

Published in Coastal Notes

TechWorks Marine advises that it is set to deploy two marine monitoring buoys in Tralee Bay as part of environmental oceanographic monitoring for Fenit Harbour.

The DB 500 data buoys will be deployed tomorrow, Friday 26 March, weather depending, and will be in place until at least Friday 30 April, after which they will be retrieved by a chartered vessel.

A flat-bottomed aqua-cultural work barge named the Kerry Pearl will be deploying the buoys. During deployment and recovery, VHF Channels monitored will be Channel 14 (Fenit Harbour working channel) and Channel 16.

During the extent of deployment, vessel traffic will need to avoid the area.

Full details including exact location coordinates are included in Marine Notice No 14 of 2021, which can be downloaded below.

Published in Irish Harbours

TechWorks Marine has scheduled the deployment of a wave buoy off the coast of Wicklow on Tuesday 8 December, weather allowing.

The buoy will be a yellow DB 500 and have a flashing light sequence of five flashes every 20 seconds, with a range of three nautical miles. The buoy will be marked with a St Andrew’s sross and radar reflector.

The wave buoy will be deployed at 53° 2' 35” N, -5° 41' 17” W by the the AMS Retriever (Callsign MEHI8) with an AIS system on board which has a provisional callsign of CWPW01.

If the deployment is delayed due to the weather, it will be carried out on the next viable tide and weather window. Once deployed, the wave buoy will remain on site for a minimum of six months.

Further details can be found in Marine Notice No 57 of 2020, a PDF of which is available to download below.

Published in Marine Warning

The Department of Transport, Tourism and Sport has been advised by TechWorks Marine that the lantern on the monitoring buoy in Killybegs Harbour has stopped working.

The buoy is part of environmental oceanographic monitoring for the Department of Agriculture, Food and the Marine in a project that began last September, and can be found at 54° 37.03' N, 008° 26.40' W.

The buoy is deployed on a dual mooring. Two small marker buoys indicate the locations of each of the buoy’s moorings. Vessel traffic will need to avoid this area.

The lantern will be repaired as soon as possible on the next viable tide and weather window. For further information contact TechWorks Marine at 01 236 5990.

Published in Marine Warning

#MARINE SCIENCE - An Irish marine science company will lead a new research project using satellites to monitor coastal outlets in Europe, as Silicon Republic reports.

TechWorks Marine, based in Dun Laoghaire, has won the contract to head up the European Space Agency's earth observation project in what is a first for any Irish company.

The business specialises in real-time marine data platforms, and in this project will be using its expertise to assist operators and developers of water treatment plants to help reduce their impact on the environment.

A main focus of the observation research will be the coastal effect of wastewater treatment in Donegal Bay.

TechWorks Marine MD Charlotte O'Kelly told Silicon Republic that improvements in sensor technology have prompted the development of satellite imagery of a high enough resolution to allow for close monitoring of coastal activity even from earth orbit.

Minister of State for Research and Innovation Sean Sherlock said the contract "clearly indicates that Irish SMEs have the capability and expertise to lead projects in this highly competitive sector".

Silicon Republic has much more on the story HERE.

Published in Marine Science

Sharks in Irish waters

Irish waters are home to 71 species of shark, skates and rays, 58 of which have been studied in detail and listed on the Ireland Red List of Cartilaginous fish. Irish sharks range from small Sleeper sharks, Dogfish and Catsharks, to larger species like Frilled, Mackerel and Cow sharks, all the way to the second largest shark in the world, the Basking shark. 

Irish waters provide a refuge for an array of shark species. Tralee Bay, Co. Kerry provides a habitat for several rare and endangered sharks and their relatives, including the migratory tope shark, angel shark and undulate ray. This area is also the last European refuge for the extremely rare white skate. Through a European Maritime and Fisheries Fund (EMFF) project, Marine Institute scientists have been working with fishermen to assess the distribution, diversity, and monthly relative abundance of skates and rays in Tralee, Brandon and Dingle Bays.

“These areas off the southwest coast of Ireland are important internationally as they hold some of the last remaining refuges for angel shark and white skate,” said Dr Maurice Clarke of the Marine Institute. “This EMFF project has provided data confirming the critically endangered status of some species and provides up-to-date information for the development of fishery measures to eliminate by-catch.” 

Irish waters are also home to the Black Mouthed Catshark, Galeus melastomus, one of Ireland’s smallest shark species which can be found in the deep sea along the continental shelf. In 2018, Irish scientists discovered a very rare shark-nursery 200 nautical miles off the west coast by the Marine Institute’s ROV Holland 1 on a shelf sloping to 750 metres deep. 

There are two ways that sharks are born, either as live young or from egg casings. In the ‘case’ of Black Mouthed Catsharks, the nursery discovered in 2018, was notable by the abundance of egg casings or ‘mermaid’s purses’. Many sharks, rays and skate lay eggs, the cases of which often wash ashore. If you find an egg casing along the seashore, take a photo for Purse Search Ireland, a citizen science project focusing on monitoring the shark, ray and skate species around Ireland.

Another species also found by Irish scientists using the ROV Holland 1 in 2018 was a very rare type of dogfish, the Sail Fin Rough Shark, Oxynotus paradoxus. These sharks are named after their long fins which resemble the trailing sails of a boat, and live in the deep sea in waters up to 750m deep. Like all sharks, skates and rays, they have no bones. Their skeleton is composed of cartilage, much like what our noses and ears are made from! This material is much more flexible and lighter than bone which is perfect for these animals living without the weight of gravity.

Throughout history sharks have been portrayed as the monsters of the sea, a concept that science is continuously debunking. Basking sharks were named in 1765 as Cetorhinus maximus, roughly translated to the ‘big-nosed sea monster’. Basking sharks are filter feeders, often swimming with their mouths agape, they filter plankton from the water.

They are very slow moving and like to bask in the sun in shallow water and are often seen in Irish waters around Spring and early Summer. To help understand the migration of these animals to be better able to understand and conserve these species, the Irish Basking Shark Group have tagged and mapped their travels.

Remarkably, many sharks like the Angel Shark, Squatina squatina have the ability to sense electricity. They do this via small pores in their skin called the ‘Ampullae of Lorenzini’ which are able to detect the tiny electrical impulses of a fish breathing, moving or even its heartbeat from distances of over a kilometre! Angel sharks, often referred to as Monkfish have a distinctively angelic shape, with flattened, large fins appearing like the wings of an angel. They live on the seafloor in the coastal waters of Ireland and much like a cat are nocturnal, primarily active at night.

The intricate complexity of shark adaptations is particularly noticeable in the texture of their skin. Composed of miniscule, perfectly shaped overlapping scales, the skin of shark provides them with protection. Often shark scales have been compared to teeth due to their hard enamel structure. They are strong, but also due to their intricate shape, these scales reduce drag and allow water to glide past them so that the shark can swim more effortlessly and silently. This natural flawless design has been used as inspiration for new neoprene fabric designs to help swimmers glide through the water. Although all sharks have this feature, the Leafscale Gulper Shark, Centrophorus squamosus, found in Ireland are specifically named due to the ornate leaf-shape of their scales.