Menu

Ireland's sailing, boating & maritime magazine

Displaying items by tag: lifering

Two fishermen in the Irish Sea were rescued from the water this afternoon after drifting for an hour in the water before their cries for help were heard.

Liverpool Coastguard received a 999 call from a member of the public at just after 1.30pm. The caller had heard calls for help from the water and spotted two people in difficulty off Silloth, Cumbria. Coastguard Rescue Teams from Maryport and Burgh by Sand were sent to the scene with the RNLI Inshore Lifeboat from Silloth and Maryport Inshore Rescue Boat.

The fishermen were rescued from the water by the RNLI Inshore Lifeboat and taken to hospital in Carlisle by ambulance. It then transpired that they had been fishing for shrimps at Cardurnock Flats, four miles from where they were found. It appears that their net got caught and their ten-metre fishing vessel 'Boy Bailey' turned over in the water. The vessel then sank and the men spent an hour drifting in the water, supported by life rings.

Tony Topping Liverpool Coastguard Watch Manager said:
"These fishermen were extremely lucky. Firstly they managed to grab life rings and then the tide carried them the four miles down to Silloth.

"The MCA recommends that commercial fishermen wear a personal floatation device or lifeline whilst working on the deck of a vessel at sea. This will keep you afloat should the unexpected happen and if you also have your vessel fitted with VHF DSC radio equipment which can send a distress alert you'll also have a way of calling for assistance when you need it."

Published in Coastguard

About the TP52 Racing Yacht

The TP52 racing yacht is a remarkable example of cutting-edge technology in the world of competitive yachting. Measuring 52 feet (15.85 metres) in length, this vessel is constructed entirely from carbon fibre, making it an incredibly light and agile craft.

The TP52 features a 6.25-metre high rig, complete with a fractional asymmetrical spinnaker and a self-tacking jib. This design reduces the workload of the crew, allowing for more efficient manoeuvres and freeing up the crew to focus on the mainsheet upwind and on two-sail reaches.

The spinnaker rigging set-up, measuring 15.00 m2, presents a challenge to even the most experienced crews, requiring them to be fit and perfectly coordinated. Maneuvering the boat requires athleticism due to the vessel's lack of inherent stability and the high speed generated by the fully battened mainsail and jib.

The TP52's hull is constructed of fibreglass-reinforced polyester in a foam sandwich layout, resulting in a weight of just 74kg. The fully battened mainsail and jib are made from a transparent Mylar laminate with orange or red Dacron trimming, while the spinnaker is manufactured from ripstop Nylon.

The mast is made up of three parts, featuring an aluminium bottom and middle section, with a polyester-fibreglass composite tip to increase mast bend and decrease overall weight. The capsizing moment, which can be generated by a heavy mast tip, is also reduced through this design. The TP52's foils are constructed from either aluminium or fibreglass, depending on the specific requirements of the vessel.

Overall, the TP52 racing yacht is an exceptional example of the latest advancements in yacht design and technology. Its lightweight construction, advanced rigging, and high-speed capabilities make it a top contender in the world of competitive yachting, challenging even the most skilled and experienced crews.