Menu

Ireland's sailing, boating & maritime magazine

Displaying items by tag: Michael Galvin

#MCIB - Overloading of the boat deck and a missing hatch at the stern may have caused a fatal loss of buoyancy that led to the drowning of two fishermen off Co Clare last year, according to the official report into the incident.

As previously reported on Afloat.ie, the remains of the two fishermen were found by local divers at the wheelhouse of their sunken boat near Spanish Point on 14 August 2012 during a search operation for the fishing vessel Lady Eileen.

Their craft had been reported missing the previous day after they failed to return from a trip to mend snagged nets, and a massive search operation was mounted after debris and diesel were discovered in the water close to Spanish Point that evening.

The two men lost were later named as owner/skipper Michael Galvin and crew Noel Dickinson, both of Quilty in Co Clare.

In its official report into the incident, the Marine Casualty Investigation Board (MCIB) found that the vessel had a low freeboard, such that even in an unladen condition it would not have to heel by a significant degree to take water on the deck.

With the weight of nets and the seawater tank used to store crustaceans, the vessel's freeboard was reduced such that water would be allowed to "flow freely on to the deck even in very calm weather conditions". This is water that would not be quickly released, with potentially very serious effects on the craft's buoyancy.

In addition, a panel removed by Galvin some weeks before to do repair work on the sterngear appeared not to have been replaced, possibly allowing a catastrophic amount of water on deck if the boat encountered wind or wave action.

With no witnesses to the incident it is unknown exactly what happened to cause the boat to be swamped, though it is thought to have transpired very quickly as neither man was wearing a lifejacket and the boat's manually operated emergency beacon in the wheelhouse was not activated.

Among the MCIB's recommendations is that the Minister for Transport reviews the Code of Practice for fishing vessels under 15m to devise new stability criteria.

Volunteers participating in search operations have also been urged to co-ordinate their assistance, after an open boat with three on board was capsized by waves while searching for the Lady Eileen and its crew.

All were thrown overboard though were quickly rescued by Garda divers in the area.

The full report from the MCIB is available to download below.

Published in MCIB

About the 29er Skiff Dinghy

The 29er is a one-design double-handed, single trapeze skiff for youth sailors.

There is an active class in Ireland, just one of the 38-countries from across all continents now racing the high-performance skiff.

The 29er is one of the latest dinghy classes to arrive in Ireland and has a 50/50 split between boys and girls.

The class like to describe the boat as "The most popular skiff for sailors who want to go fast!".

Derived from the Olympic class 49er class and designed by Julian Bethwaite the 29er was first produced in 1998.

Two sailors sail the 29er, one on trapeze.

The class is targeted at youth sailors aiming at sailing the larger 49er which is an Olympic class.


The 6.25-metre high rig features a fractional asymmetrical spinnaker; a self-tacking jib decreases the workload of the crew, making manoeuvres more efficient and freeing the crew to take the mainsheet upwind and on two-sail reaches.

The 15.00 m2 spinnaker rigging set-up challenges crews to be fit and coordinated, and manoeuvres in the boat require athleticism due to its lack of inherent stability and the high speed with which the fully battened mainsail and jib power up.

The 74kg weight hull is constructed of fibreglass-reinforced polyester in a foam sandwich layout.

The fully battened mainsail and jib are made from a transparent Mylar laminate with orange or red Dacron trimming, while the spinnaker is manufactured from ripstop Nylon.

The mast is in three parts - an aluminium bottom and middle section, with a polyester-fibreglass composite tip to increase mast bend and decrease both overall weights, and the capsizing moment a heavy mast tip can generate. Foils are aluminium or fibreglass.

About the ILCA/Laser Dinghy

The ILCA, formerly known as the Laser, is the most produced boat in the world, with 220,000 units built since 1971.

It's easy to see why the single-handed dinghy has won the title of the most widely distributed boat of all time.

The Laser is a one-design dinghy, the hulls being identical but three rigs that can be used according to the size and weight of the sailor.

The class is international, with sailors from 120 countries. The boat has also been an Olympic class since 1996, being both the men's and women's singlehanded dinghy.

Three rigs are recognised by the International Laser Class Association (ILCA):

  • ILCA 4: sail of 4.70m2
  • ILCA 6: sail of 5.76 m2
  • ILCA 7: sail of 7.06 m2

29er skiff technical specs

  • Hull weight 74kg (163lb)
  • LOA 4.45m (14.4ft)
  • Beam 1.77m (5ft 7in)
  • Crew 2 (single trapeze) 
  • Spinnaker area 15.00 m2 (181.2sq.ft)
  • Upwind sail area 12.5 m2 (142.0 sq.ft)
  • Mast length 6.25m (20.5ft)

Featured Sailing School

INSS sidebutton

Featured Clubs

dbsc mainbutton
Howth Yacht Club
Kinsale Yacht Club
National Yacht Club
Royal Cork Yacht Club
Royal Irish Yacht club
Royal Saint George Yacht Club

Featured Brokers

leinster sidebutton

Featured Webcams

Featured Associations

ISA sidebutton
ICRA
isora sidebutton

Featured Marinas

dlmarina sidebutton

Featured Chandleries

CHMarine Afloat logo
https://afloat.ie/resources/marine-industry-news/viking-marine

Featured Sailmakers

northsails sidebutton
uksails sidebutton
watson sidebutton

Featured Blogs

W M Nixon - Sailing on Saturday
podcast sidebutton
BSB sidebutton
wavelengths sidebutton
 

Please show your support for Afloat by donating