Menu

Ireland's sailing, boating & maritime magazine

Displaying items by tag: shiptoship transfer

#SHIPPING - The transfer of hazardous cargo from the stricken tanker at the entrance to Belfast Lough has been delayed yet again due to winds nearing hurricane strength.

The Belfast Telegraph reports that the Genmar Conpanion - which was redirected to Belfast after reporting a cracked hull en route from Rotterdam to New York - will remain sheltering off the Copeland Islands until the weather improves.

As previously reported on Afloat.ie, the ship-to-ship transfer of 54,000 tonnes of vacuum gas oil was originally scheduled to take place on 31 December last, but the task was pushed back as the receiving ship, BW Seine, was delayed by weather in the North Sea.

It had then been hoped to begin the transfer early yesterday with the receiving ship's arrival, but the strong storm-force winds that have increasingly battered Ireland in the last 36 hours put paid to those plans.

Ship-to-ship transfers can take place in wind speeds of up to 35 knots, but yesterday the wind speed in Belfast Lough was reported as more than double that.

Hugh Shaw, the NI Secretary of State's representative for maritime salvage and intervention, told the Belfast Telegraph: "As soon as we have a window to do the ship-to-ship transfer safely we will take it.

"Winds have been dropping a bit, but it looks unlikely the operation will take place on Wednesday."

Published in Ports & Shipping

#SHIPPING - The transfer of cargo from the damaged oil tanker sheltering at the entrance to Belfast Lough has been posponed for at least two more days.

As previously reported on Afloat.ie, the 228-metre Germar Companion - which is carrying 54,000 tonnes of vacuum gas oil - was redirected to Belfast after reporting a cracked hull en route from Rotterdam to New York.

The merchant vessel has been sheltering off the Copeland Islands since 16 December, where an official examination recommended removal of the cargo.

Today (31 December 2011) had been the scheduled start date for the move of the tanker's hazardous cargo by ship-to-ship tranfer. But the move has been delayed as the second ship, the BW Seine, is still en route to Belfast Lough.

"It is currently in the North Sea and could take another two days before it reaches the vessel and starts to transfer the cargo," a coastguard spokesperson told the Belfast Telegraph.

The transfer will be managed by specialist company Fendercare Marine in the lough, and could take between 24 and 36 hours. Once finished, the Germar Companion will sail into Belfast for repairs.

Published in Ports & Shipping

About the 29er Skiff Dinghy

The 29er is a one-design double-handed, single trapeze skiff for youth sailors.

There is an active class in Ireland, just one of the 38-countries from across all continents now racing the high-performance skiff.

The 29er is one of the latest dinghy classes to arrive in Ireland and has a 50/50 split between boys and girls.

The class like to describe the boat as "The most popular skiff for sailors who want to go fast!".

Derived from the Olympic class 49er class and designed by Julian Bethwaite the 29er was first produced in 1998.

Two sailors sail the 29er, one on trapeze.

The class is targeted at youth sailors aiming at sailing the larger 49er which is an Olympic class.


The 6.25-metre high rig features a fractional asymmetrical spinnaker; a self-tacking jib decreases the workload of the crew, making manoeuvres more efficient and freeing the crew to take the mainsheet upwind and on two-sail reaches.

The 15.00 m2 spinnaker rigging set-up challenges crews to be fit and coordinated, and manoeuvres in the boat require athleticism due to its lack of inherent stability and the high speed with which the fully battened mainsail and jib power up.

The 74kg weight hull is constructed of fibreglass-reinforced polyester in a foam sandwich layout.

The fully battened mainsail and jib are made from a transparent Mylar laminate with orange or red Dacron trimming, while the spinnaker is manufactured from ripstop Nylon.

The mast is in three parts - an aluminium bottom and middle section, with a polyester-fibreglass composite tip to increase mast bend and decrease both overall weights, and the capsizing moment a heavy mast tip can generate. Foils are aluminium or fibreglass.

About the ILCA/Laser Dinghy

The ILCA, formerly known as the Laser, is the most produced boat in the world, with 220,000 units built since 1971.

It's easy to see why the single-handed dinghy has won the title of the most widely distributed boat of all time.

The Laser is a one-design dinghy, the hulls being identical but three rigs that can be used according to the size and weight of the sailor.

The class is international, with sailors from 120 countries. The boat has also been an Olympic class since 1996, being both the men's and women's singlehanded dinghy.

Three rigs are recognised by the International Laser Class Association (ILCA):

  • ILCA 4: sail of 4.70m2
  • ILCA 6: sail of 5.76 m2
  • ILCA 7: sail of 7.06 m2

29er skiff technical specs

  • Hull weight 74kg (163lb)
  • LOA 4.45m (14.4ft)
  • Beam 1.77m (5ft 7in)
  • Crew 2 (single trapeze) 
  • Spinnaker area 15.00 m2 (181.2sq.ft)
  • Upwind sail area 12.5 m2 (142.0 sq.ft)
  • Mast length 6.25m (20.5ft)

Featured Sailing School

INSS sidebutton

Featured Clubs

dbsc mainbutton
Howth Yacht Club
Kinsale Yacht Club
National Yacht Club
Royal Cork Yacht Club
Royal Irish Yacht club
Royal Saint George Yacht Club

Featured Brokers

leinster sidebutton

Featured Webcams

Featured Associations

ISA sidebutton
ICRA
isora sidebutton

Featured Marinas

dlmarina sidebutton

Featured Chandleries

CHMarine Afloat logo
https://afloat.ie/resources/marine-industry-news/viking-marine

Featured Sailmakers

northsails sidebutton
uksails sidebutton
watson sidebutton

Featured Blogs

W M Nixon - Sailing on Saturday
podcast sidebutton
BSB sidebutton
wavelengths sidebutton
 

Please show your support for Afloat by donating