Menu

Ireland's sailing, boating & maritime magazine

Displaying items by tag: Model Boats

IOM ranking - Birkendhead/UK 5th March

Jeff and Stephen Kay of Howth Yacht Club took part in one of the big racing events in the UK recently. In Birkenhead there were 21 boats altogether and Jeff managed a podium in 3rd place with Stephen ending up with a very respectable 10th place. 

Pretty good results as putting them in perspective in that fleet was the former World champion Rob Walsh and other top ranking skippers at European and World Championships. So a pretty tough bunch of skippers to sail with.

Full results here

2016 IOM Malta Open – Malta 17th-20th March

Stephen then went on to compete at the 2016 Malta Open and recently returned from it.

It was his first serious event with his new Britpop design (he sailed his V9 design at Birkenhead) and while he found his pace to be on part with the top skippers the lack of experience in starts with a full fleet of boats costed him a lot of points. 

Being a small fleet of us here sailing regularly mean that we know each other well and so can becomes 70% match race vs fleet race as we know who is good in what conditions and we have much more room at the start too.

I experienced this also few months ago competing in France. If you allow yourself to get swallowed by the pack on the line you’ll get spit out at the back very quickly. Experience is key there and I can be safe in saying like with any other boat classes, full size or RC the race starts 5 minutes before the actual start.

You need to be quick to react to situation and find plan B or C very quickly too.

Talking to Stephen, the wind was tricky with lots of shifts and puffs and lulls resulting in numerous changes of places throughout each races. This made rounding that first mark ahead so crucial as once the pack arrived that weather mark could become very crowded very quickly and that’s a risk to loose big. An elevated piloting area made it easier for the skippers to see their boats.

There were a number of nationalities at this event which was won by a German followed by 8 UK skippers with the first skipper from Malta finishing 10th. Stephen finished an honorable 23rd out of 42 boats.

This shows the dominance of the UK Skippers in Europe making them one of the toughest fleet. As I said earlier about Birkendhead… to put things in perceptive!

What is also worth mentioning is that if you look at the results it is no long a clear dominance from the Britpop design anymore as there is a clear spread of designs in across the results. Which means that other designers have catch up to Brad’s BP design and leveled the playing field once again providing close racing as we want. Download results below.

Coming up…

Gilbert will be travelling to France and will race at a regatta on the 10th April but with a restored boat so it will be interesting to see the outcome.

Published in Model Boats

#modelboats – Despite an uneasy weather forecast and torrential rain during the week model boat skippers heading for the Ulster IOM championships just couldn't complain about the weekend as we had light wind, a good few sunny spells and no rain at all writes Gilbert Louis.

With this in mind we had more skippers than last year's Ulster's championships. They came from the Republic, Northern Ireland, Scotland and England, 18 in total.

Saturday saw the whole fleet of 18 boats sailing together. Despite talks of splitting into 2 fleets the decision was made to keep us all in one fleet which has one key advantage. We get twice as many race and time on the water and this is part of sailing.

The format was sets of 3 races pretty much back to back with only a few minutes for skippers to make adjustments if needed between the races, to tune their boats to the conditions. Or giving an opportunity for quick fixes in case of brakeage.

Then a longer break before the next set of 3 races. This format allowed us to spend great time on the water and get the most of the day sailing not watching others sail. Everyone enjoyed it.

Sure it also made for spectacular starts ! 18 boats on the starting line is not something we're used to so you have to be on the first line or you get spat out at the back very quickly after the start. This is excellent training for us as we don't have that experience in Ireland but that's what they do at international levels so a good exposure for us.

The trick is to be amongst the front line of boats in the last few seconds before the start. You need to make your space and defend it. Not easy when you're in your boat, even more difficult when you have your boat in a swarm of other boats all looking to have the perfect start.

The start and first beat to the weather mark will dictate pretty much 70-80% of your race result. It is so much easier to control the fleet from the front then try to sail through it to get there. Particularly when there is very little difference in boat speed. It is too easy when you're behind to say my boat is not as fast as the other at the front but actually I found that my boat speed particularly on the Sunday was very similar to them. So the difference is elsewhere: a good start, clean air, going on the right side, staying clear of contacts and good tacks. Yes the difference will show in making mistake on any of these and at the end when you add all the boat lengths you lost in a bad tack, going the wrong side or worth a bad start and I don't even count getting cought up with other boats, penalties and these add up to several boat lengths and places between you and the first boat.

Jeff Kay from HYC who's our most experienced skipper having competed at several European and World championships was able to use that experience and get great starts and was "fighting" for top 5 places on regular basis.

There were 5 of us coming from the Republic: Jeff and his brother Stephen Kay, both racing the now very popular and successful Britpop designed by Brad Gibson. Then Des and myself sailing a XP designed by Frank Russell, and Oscar, a new addition to our fleet who came to compete for his first ever IOM regatta with my trusty V6 designed by Ian Vickers.

The intensity of the races back to back took its toll on Jeff's back and he had to sit a a number of races despite really good performance on the water.

Stephen did well up until his electric issue started. He got very irregular results due to a random receiver problem which got worse and forced him to abandon the event. A real pity as he also had the pace.

Des struggled on the saturday with his XP, trying to find a good tuning for the light wind conditions and his work paid out as he was right in the fight on day 2.

Gilbert was trying his brand new XP which only touched the water once before for the floatation test so it was very much unknown whether that design could match the reputable speed of the Britpop. Race after race Gilbert fixed a number of teething problems which improved reliability and upwind performance but an alignment problem of the gooseneck forcing the main boom upwards as the sheets were eased, spilling the wind out meant that he coudn't gain places on the downwind legs but was rather loosing some.

On day 2 and a fixed gooseneck Gilbert managed to bring the pace of the boat closer to the best. But the starts were still a problem which coudn't be fixed in tuning. Yet race after race he was working his way up to the front of the fleet and finished on a high as he managed a stunning start of the last race and after good tactical decision led at the weather mark and managed to keep no 46 britpop at bay to lead to the finish. So the XP has potential, more time sailing in different conditions will give us more information on this new design.

Bottom line we still have work to do in Ireland to match the Scots and English but we're making progress which is encouraging. A great meal at Paddy's barn pub put an end to this great event before people left to get their ferry back.

Supporting this event is our repeat sponsor Catsails so thank you Nigel and Sue for your on going support.

Brian O'Neill planned and organised this event with the support of Bill, Ali and others making this year's event another great success. 

Next is the Winter Series in Howth Yacht Club that starts shortly.

Published in Model Boats

#modelboat – Pirate ships were made of wood, viking ships were also build of wood, in fact a lot of boats were made using this noble and natural material, wood writes Gilbert Louis.

But nowadays most of the boats are build using composite materials like fibreglass, carbon, kevlar, aramid, honeycomb etc...I said most because some are still built in wood. I used to race a Europe dinghy made entirely in mahogany over 25 years ago when I was racing in this class in France and yet I was as competitive as with a fibreglass one.

Some model boat classes like the IOM (International One Metre) forbid the use of exotic composites like carbon, kevlar and other expensive type in the building of the boat to keep the cost down. However the class rule do allow fibreglass for the hull and carbon fibre for the fin and rudder but to encourage home build, they allow wood too.

One could think that a wooden boat wouldn't be a performant as a fibreglass one. But they'd be wrong. A German skipper designs and builds his boat (in wood as well as fibreglass), and even builds his spares in wood and uses florist wrapping laminate to cut his sails in and regularly finish in the top ten at international events. This shows that it is not all about the latest design or building material.

There is something magical in a wooden boats, something a fibreglass boat simply can't deliver. I remember my fireball had a a kevlar reinforced hull but a wooden deck and I loved it, it looked fantastic. In IOM I've only sailed fibreglass boats but this is about to change as I am about to take delivery of my first woody or wooden boat.

I am expecting a lot from that boat, and actually think that being in wood will add to the performance as it will be a really stiff boat yet with corrector weights to bring her up to minimum weight (amount of corrector weight still to be determined but expect to put around 100g). Thanks to Neill's great wood working skills who did a fantastic work building his XP.

I will be campaigning this boat going forward – I'm going to build new rigs, get new set of sails will spend time on the water to learn how to get the best of her. Hopefully joining 2 other skippers to see what we can do at the Woody's championships in the UK (reserved to wooden IOM). But also will race against fibreglass boats.

It is the beginning of a new chapter for me and if you want to know more about how I get on with my woody then stay tune as I will write progress and findings here.

To be continued

Published in Model Boats
Tagged under

#modelboatracing – Further to the IOM model yacht class development in Northern Ireland thanks to Brian O'Neill who joined the fleet about 3 years ago and who has rallied other people from the North to our activity, a new club has emerged over the winter of 2013 in Belfast Waterworks writes Gilbert Louis.

This location is not new to model boats as the activity started in 1933 and lasted until the mid 1960's when a fire burned down the club house. But now model boats are back sailing on this man made pond. It is entirely purpose build for Belfast County needs in concrete. It is flat bottom and with a depth of around 1.2m it is plenty for our model boats.

This was made possible by the support of the Belfast Council who welcomed the request, happy to see activity on this pond once more – A big thank you to the Council for their support !

I hope this will be the first of more inland ponds open to our activity to come. For now most of our sailing is on the sea but we are tight to the tides whereas on a pond we could schedule sailing well in advance.

Fair play to Bill, Wayne and Brian for making this a reality and adding to our sailing venues.

You can find all the information about the Belfast waterworks model boat club on their website 

For now they are sailing RG65 and in particular Drafon Force 65, IOM and occasionally A class too.

Published in Model Boats

#modelboat – The model boat classes have been experimenting with chines for a while now. We have seen a new trend over the recent years in boat designs. This new wave came from the racing boats, TP52, VOR70, and recently making its way to the cruiser racer designs like the new X boats or Malango to name a few.  The funny thing is that not until recently chined boats were still built by amateur builders as they are easier to build. Yet now we are coming back to them, the 10R, A class, Marblehead and also the One Metre class are now coming out with chine.
The IOM or International One Metre Class operates under a box rules format. This, in a nutshell, allows for a relatively open format to boat designs but the rules on the number of rigs and their dimensions are very stricts.
This ensures close racing as we have seen over the years. For the past couple of years the arrival of chines on boat design increased the performance of these boats a notch up. However there are still many debates about the chine and its effect on performance. From what I have seen and tested so far, I can give 3 advantages of the chine design over rounded hulls:
1- the chine helps the boat to accelerate that bit quicker after a tack.
2- It allows to track nicely on the beat versus a rounded hull that would "slide" more as it heels in the gusts.
3- it helps the boat to get planning that little bit earlier and longer on the run
there is a 4th point often discussed within the class. That boats with chines tend to nose dive less in the gusts and accelerate more. I agree to some extend as in my opinion this is primaliry due to more volume in the forward section, complemented by a higher radius of the foredeck to help the come up should it nose dive. I am not of the view that the chine helps here, and the proof is that Brad Gibson who made the most successful chine design, did design another boat before called the SKA which goes well downwind and has no chine.
See the pictures attached to see the difference in designs and even amongst the chined boats, its length, position and angle varies across the design range.
So does that means that rounded boats are passed their due date ? No not at all, not later than a month ago I won an event in Scotland with my 2006 V6 which has a rounded hull, ahead of newer chined boats. There are many other rounded hulls that are at least as successful like the Obsession, the V7 to name a few.
There is it seems a "fashion" trend to go and get a chined boat, but like any other sailing class you can focus on the little things and miss on the big picture. Like getting the tuning of the boat wrong, opting for the wrong rig, an electric failure, a bad start, seaweed in the keel, a wrong tack, overstanding a mark, and the list goes on. One has more to lose in doing any of these errors than not getting a chined boat.

Published in Model Boats

#MaritimeFeatival - Irelands largest Model-Boat Exhibition will be held during the 2nd John Barry Maritime Festival in Wexford.

The Model Boat Exhibition takes place on the weekend of 22-23 June (11am-5pm) as part of the four-day festival which starts tomorrow and ends on Sunday.

Exhibiting an extensive range of model displays will be from the Rosslare Maritime Museum, the Boat Builders Project, the Marine Institute's Touch Tank, Irish Navy aswell as maritime stalls selling their wares.

As previously reported on Afloat.ie the John Barry and JFK Photographic Exhibition is to held in the Talbot Hotel as part of the festival's new Maritime & Heritage Cultural Walking Trail.

For details of the festival full programme visit: www.jbmf.ie/en/festival/festival-programme-2013

 

Published in Maritime Festivals
This year's Heritage Week (20-28 August) includes a one-day maritime lecture's seminar organised by the Maritime Institute of Ireland. The lectures will take place in Dún Laoghaire Club, Eblana Avenue, Dún Laoghaire (12.30 to 6pm) on Sunday 28th August.
In addition to the lectures there will be an exhibition of Model Boats, by Garry Mooney, secretary of the Irish Model Boat Club, throughout the day.

Below is listing of the lecture programme and times.

12.30 – 1.30 pm. Neutral Ireland's Role in the Sinking of the Bismark, May, 1941. By Dr. Michael Kennedy, Executive Editor, Documents on Irish Foreign Policy, Royal Irish Academy.

1.30 – 2.30 pm. Traditional Boats of Ireland. - Wooden workboats from all the Maritime Counties of Ireland. By Darina Tully, Lecturer and Maritime Archaeologist.

2.30 – 3.30 pm. Too Many Bags in the Lifeboat. A Lifeboat Tragedy at Bray 1876. By James Scannell, Lecturer and P.R.O of the Old Dublin Society.

3.30 – 4.00pm. Model Boats, A short talk to accompany the exhibition. By Garry Mooney secretary of the Irish Model Boat Club.

4.00 – 5.00 pm. Maritime Guinness, The Ships, Yachts and Barges of the Guinness Dynasty. By Dr. Edward Bourke, Diver, Maritime Historian and Author of "Guinness, the Family, the Business and the Black Stuff"

5.00 – 6.00 pm. Ireland's Armada Heritage. The Story of the Spanish Armada of 1588.The discoveries of the wrecks on the Irish Coast and the recovery of artifacts. By Cormac Lowth, Lecturer, Author and Diver.

For further information contact Barney Yourell Mob: 087 900 7466 No seminar charge – donations accepted

Information in general on the Maritime Institute of Ireland can be found on www.mariner.ie and for all the other events held during the National Heritage Week go to www.heritageweek.ie/

Published in Boating Fixtures

Port of Cork Information

The Port of Cork is the key seaport in the south of Ireland and is one of only two Irish ports which service the requirements of all six shipping modes i.e., Lift-on Lift-off, Roll-on Roll-off, Liquid Bulk, Dry Bulk, Break Bulk and Cruise. Due to its favourable location on the south coast of Ireland and its modern deep-water facilities, the Port of Cork is ideally positioned for additional European trading as well as for yet unexploited direct deep-sea shipping services.

The Port of Cork is investing €80 million in a container terminal development in Ringaskiddy. The Cork Container Terminal will initially offer a 360-metre quay with 13-metre depth alongside and will enable larger ships to berth in the port. The development also includes the construction of a 13.5-hectare terminal and associated buildings as well as two ship to shore gantry cranes and container handling equipment.

The development of new container handling facilities at Ringaskiddy was identified in the Port of Cork’s Strategic Development Plan in 2010. It will accommodate current and future container shipping which can be serviced by modern and efficient cargo handling equipment with innovative terminal operating and vehicle booking systems. The Port of Cork anticipates that Cork Container Terminal will be operational in 2020.

The Port of Cork is the key seaport in the south of Ireland and is one of just two Irish ports which service the requirements of all shipping modes.

The Port of Cork also controls Bantry Bay Port Company and employs 150 people across all locations.

A European Designated Core Port and a Tier 1 Port of National Significance, Port of Cork’s reputation for quality service, including prompt and efficient vessel turnaround as well as the company’s investment in future growth, ensures its position as a vital link in the global supply chain.

The port has made impressive strides in recent decades, most recently with the construction of the new €80m Cork Container Terminal in Ringaskiddy which will facilitate the natural progression of the move from a river port to a deepwater port in order to future proof the Port
of Cork. This state-of-the-art terminal which will open in 2020 will be capable of berthing the largest container ships currently calling to Ireland.

The Port of Cork Company is a commercial semi-state company responsible for the commercial running of the harbour as well as responsibility for navigation and berthage in the port.  The Port is the main port serving the South of Ireland, County Cork and Cork City. 

Types of Shipping Using Port of Cork

The Port offers all six shipping modes from Lift-on Lift-off, Roll-on Roll-off, Liquid Bulk, Dry Bulk, Break Bulk and Cruise liner traffic.

Port of Cork Growth

The port has made impressive strides in recent decades. Since 2000, the Port of Cork has invested €72 million in improving Port infrastructure and facilities. Due to its favourable location and its modern deepwater facilities, the Port is ideally positioned for additional European trading as well as for yet unexploited direct deep-sea shipping services. A well-developed road infrastructure eases the flow of traffic from and to the port. The Port of Cork’s growing reputation for quality service, including prompt and efficient vessel turnaround, ensures its position as a vital link in the global supply chain. The Port of Cork Company turnover in 2018 amounted to €35.4 million, an increase of €3.9 million from €31.5 million in 2017. The combined traffic of both the Ports of Cork and Bantry increased to 10.66 million tonnes in 2018 up from 10.3 million tonnes in 2017.

History of Port of Cork

Famous at the last port of call of the Titanic, these medieval navigation and port facilities of the city and harbour were historically managed by the Cork Harbour Commissioners. Founded in 1814, the Cork Harbour Commissioners moved to the Custom House in 1904.  Following the implementation of the 1996 Harbours Act, by March 1997 all assets of the Commissioners were transferred to the Port of Cork Company.

Commercial Traffic at Port of Cork

Vessels up to 90,000 tonnes deadweight (DWT) are capable of coming through entrance to Cork Harbour. As the shipping channels get shallower the farther inland one travels, access becomes constricted, and only vessels up to 60,000 DWT can sail above Cobh. The Port of Cork provides pilotage and towage facilities for vessels entering Cork Harbour. All vessels accessing the quays in Cork City must be piloted and all vessels exceeding 130 metres in length must be piloted once they pass within 2.5 nautical miles (4.6 km) of the harbour entrance.

Berthing Facilities in Cork Harbour

The Port of Cork has berthing facilities at Cork City, Tivoli, Cobh and Ringaskiddy. The facilities in Cork City are primarily used for grain and oil transport. Tivoli provides container handling, facilities for oil, livestock and ore and a roll on-roll off (Ro-Ro) ramp. Prior to the opening of Ringaskiddy Ferry Port, car ferries sailed from here; now, the Ro-Ro ramp is used by companies importing cars into Ireland. In addition to the ferry terminal, Ringaskiddy has a deep water port.

Port of Cork Development Plans

2020 will be a significant year for the Port of Cork as it prepares to complete and open the €86 million Cork Container Terminal development in Ringaskiddy.

Once operational the new terminal will enable the port to handle up to 450,000 TEU per annum. Port of Cork already possess significant natural depth in Cork harbour, and the work in Ringaskiddy Port will enable the Port of Cork to accommodate vessels of 5500 to 6000 TEU, which will provide a great deal of additional potential for increasing container traffic.

It follows a previous plan hatched in 2006 as the port operated at full capacity the Port drew up plans for a new container facility at Ringaskiddy. This was the subject of major objections and after an Oral Planning Hearing was held in 2008 the Irish planning board Bord Pleanala rejected the plan due to inadequate rail and road links at the location.  

Further notable sustainability projects also include:

  • The Port of Cork have invested in 2 x STS cranes – Type single lift, Model P (148) L, (WS) Super. These cranes contain the most modern and energy-efficient control and monitoring systems currently available on the market and include an LED floodlight system equipped with software to facilitate remote diagnostics, a Crane Management System (CMS) and an energy chain supply on both cranes replacing the previous preferred festoon cabling installation.
  • The Port of Cork has installed High Mast Lighting Voltage Control Units at its two main cargo handling locations – Tivoli Industrial & Dock Estate and Ringaskiddy Deep-water & Ferry Terminals. This investment has led to more efficient energy use and reduced risk of light pollution. The lights can also be controlled remotely.
  • The Port of Cork’s largest electrical consumer at Tivoli Container Terminal is the handling and storage of refrigerated containers. Local data loggers were used to assess energy consumption. This provided timely intervention regarding Power Factor Correction Bank efficiency on our STS (Ship to Shore) Cranes and Substations, allowing for reduced mains demand and reducing wattless energy losses along with excess charges. The information gathered has helped us to design and build a reefer storage facility with energy management and remote monitoring included.

Bantry Port

In 2017 Bantry Bay Port Company completed a significant investment of €8.5 million in the Bantry Inner Harbour development. The development consisted of a leisure marina, widening of the town pier, dredging of the inner harbour and creation of a foreshore amenity space.

Port of Cork Cruise Liner Traffic

2019 was a record cruise season for the Port of Cork with 100 cruise liners visiting. In total over 243,000 passengers and crew visited the region with many passengers visiting Cork for the first time.

Also in 2019, the Port of Cork's Cruise line berth in Cobh was recognised as one of the best cruise destinations in the world, winning in the Top-Rated British Isles & Western Europe Cruise Destination category. 

There has been an increase in cruise ship visits to Cork Harbour in the early 21st century, with 53 such ships visiting the port in 2011, increasing to approximately 100 cruise ship visits by 2019.

These cruise ships berth at the Port of Cork's deepwater quay in Cobh, which is Ireland's only dedicated berth for cruise ships.

Passenger Ferries

Operating since the late 1970s, Brittany Ferries runs a ferry service to Roscoff in France. This operates between April and November from the Ro-Ro facilities at Ringaskiddy. Previous ferry services ran to Swansea in Wales and Santander in Spain. The former, the Swansea Cork ferry, ran initially between 1987 and 2006 and also briefly between 2010 and 2012.

The latter, a Brittany Ferries Cork–Santander service, started in 2018 but was cancelled in early 2020.

Marine Leisure

The Port of Cork has a strategy that aims to promote the harbour also as a leisure amenity. Cork’s superb natural harbour is a great place to enjoy all types of marine leisure pursuits. With lots of sailing and rowing clubs dotted throughout the harbour, excellent fishing and picturesque harbour-side paths for walking, running or cycling, there is something for everyone to enjoy in and around Cork harbour. The Port is actively involved with the promotion of Cork Harbour's annual Festival. The oldest sailing club in the world, founded in 1720, is the Royal Cork Yacht Club is located at Crosshaven in the harbour, proof positive, says the Port, that the people of Cork, and its visitors, have been enjoying this vast natural leisure resource for centuries. 

Port of Cork Executives

  • Chairman: John Mullins
  • Chief Executive: Brendan Keating
  • Secretary/Chief Finance Officer: Donal Crowley
  • Harbour Master and Chief Operations Officer: Capt. Paul O'Regan
  • Port Engineering Manager: Henry Kingston
  • Chief Commercial Officer: Conor Mowlds
  • Head of Human Resources: Peter O'Shaughnessy