Menu

Ireland's sailing, boating & maritime magazine

Displaying items by tag: Esso Kobenhavn

A rather obscure-looking vessel  that once served as a oil-tanker during World War II and  which managed to stave off successfully an enemy U-Boat attack, arrived into the Port of Cork yesterday, writes Jehan Ashmore.
The vessel, the Henry P Lading, which now works as a cable/pipe-laying barge, was towed into the harbour by the tug Thor and was joined by the Cobh-based tug, Breedbank (see photo). The barge is to lay installation cables between Whitegate Oil Refinery and Ringaskiddy in a project that is expected to take approximately three weeks to complete as four cables will be laid in four separate runs across the channel.

To read further information about the cable installation project which is listed on the Port of Cork Company website under Notice to Mariners (No. 6 of 2011) click here.

The odd appearance of the barge masks a colourful and chequered career, as only a remnant of the original vessel survives (see photo). Only the forward section and bow (90m long X 20m beam) remain after the partial scrapping of the former oil tanker, Esso København, which took place nearly fifty years ago.

She was launched in 1930 as the MS Peter Hurll by the Palmers Shipbuilding and Iron Company Ltd (Yard/Hull no. 479) at Hebburn-on-Tyne, England. Measuring 11,952grt the tanker was commissioned for Baltisch-Amerik Petroleum Import G.m.b.H. (Waried Tankschiff Rhed.) of Danzig. For further details click here.

The vessel's profile was typical of the era, with a 'two-island' arrangement where the bridge superstructure is sited amidships and separated from the crew's accommodation quarters located aft on the poop deck at the stern.

At 452-foot long, the 17,585dwt vessel had a cargo carrying capacity of 138,108 barrels, which had an assigned pumping rate of 4,000 barrels an hour. The twin-screw diesel powered vessel had 5,300 brake horsepower engines that gave a speed of 12.3 knots.

In 1935 the vessel was sold to the Panama Transport Co. of Panama. While en route to Aruba, with an American crew, war was declared in Europe on  September 3, 1939. At the Caribbean island's port of Las Piedras the Peter Hurll loaded her first war-time cargo of 106,514 barrels of fuel and crude oils bound for Everett, Mass.

Throughout the war years the Peter Hurll was crewed at various times between  Americans and Danes. To read in greater detail the career history of the vessel and an account of the attempted U-Boat attack on the Peter Hurll click here. The tanker had several sisters, the F. H. Bedford Jr, J. H. Senior,  J.A. Mowinckel and The Heinrich v. Riedemann which was lost on April 16, 1942.

Only a few months after the war in February 1946, the Peter Hurll bunkered the Queen Mary, which was moored alongside Pier 90 on the North River, New York. In less than 10 hours the vessel tranferred 27,797 barrels of fuel in a direct tanker-to-ship delivery of fuel oil. The famous 80,000 tonnes Cunard liner which like the tanker, was also built in 1930, had been recently re-converted from a troopship to her peacetime role as a passenger-liner.

In 1967 the liner retired and the vessel is moored at Long Beach, California, as a static hotel, restaurant and museum (see www.queenmary.com).

Two years later the Peter Hurll changed ownership to Det Danske Petroleums A/S of Copenhagen but later under the control of Dansk Esso A/S was  renamed Esso København (see link) and the vessel was enlarged to a tonnage of 12,043grt.

In 1952, the vessel was taken to Odense, Denmark by H. J. Hansen, where the vessel was partially broken-up. The remaining fore-end survived and was rebuilt as a cable / pipe laying barge in 1963 (click here). The structure which essentially is a barge was named Henry P Lading for new owners, Nordisk Kabel og Traadfabrikker A/S, Copenhagen.

At one stage the barge was renamed "Nkt Cables a/S" but in 2002 the barge was sold to Jydsk Dykkerfirma ApS, now named JD Contractor A/S. The company (click here) is the largest underwater contractor in Denmark, providing diving assignments and the laying and embedding of submarine cables and pipelines worldwide.

Only late last year, scuba-divers found a fully intact World War I U-Boat on the seabed just outside Cork harbour. To read more about the U-Boat which sank some 93 years ago and photos click here.

Published in Ports & Shipping

About Marine Technology

Marine technology, as defined by the European association WEGEMT, refers to the use of technology for ensuring the safe use, exploitation, protection of, and intervention in, the marine environment. This includes a wide range of technologies that support naval architecture, marine engineering, ship design, ship building, and ship operations.

In addition to these foundational technologies, marine technology also encompasses oil and gas exploration, exploitation, and production, hydrodynamics, navigation, sea surface and sub-surface support, underwater technology and engineering, marine resources (including both renewable and non-renewable marine resources), transport logistics and economics, inland, coastal, short sea and deep sea shipping, protection of the marine environment, and leisure and safety.

The importance of marine technology cannot be overstated. With over 70% of the earth's surface covered by water, the marine environment plays a critical role in our lives. From transportation to energy production, marine technology enables us to harness the immense potential of the oceans while minimizing the impact on the environment.

Moreover, the development of marine technology is crucial for the sustainable use of marine resources. As the demand for seafood and other marine products continues to grow, the sustainable management of these resources becomes increasingly important. Marine technology can help us to achieve this by providing innovative solutions for sustainable fishing, aquaculture, and other forms of marine resource management.

In Ireland, claims are made that the island country "has the potential to be the “Silicon Valley” of the aquatech world". Ireland is at a very exciting stage when it comes to aquatech. There are currently 62 aquatech companies operating here, all using technology to enable sustainable seafood farming at a time when the sector is facing many challenges.”

Ireland’s growing expertise in the developing aquatech sector means it has the potential to become a global leader in the field, with Irish aquatech companies turning over €200m last year.

Over €15m has been invested in aquatic businesses, and over 200 high-tech jobs have been created in the sector over the last six years.

In conclusion, marine technology is a vast and rapidly evolving field encompassing a broad range of technologies and applications. As we continue to explore and exploit the potential of the oceans, marine technology will play an increasingly important role in ensuring the safe and sustainable use of these resources.