Menu

Ireland's sailing, boating & maritime magazine

Displaying items by tag: engine room

A breach in the engine compartment caused the fishing vessel Ainmire to take on water and sink off the coast of Scotland in April last year, according to the official report into the incident.
All crew on board the vessel were transferred safetly to another fishing boat that responded to its distress call, some 30 miles northwest of the Butt of Lewis on the morning of 29 April 2010.
The Marine Casualty Investigation Board (MCIB) report concluded that the failure of a sea water cooling pipe in the engine room was the most likely cause of the flooding, and pointed to the fact that the pipework had not been renewed during the life of the vessel.
It was also noted that the bilge pump and its motors were located under the floor plates in the engine room, and thus were inoperable when the water level had risen in the compartment.
In addition, the MCIB report found that the Ainmire has been operating without a Fishing Vessel Safety Certificate for more than six months at the time of the incident.
Though the owner had submitted a survey application and paid the required fee to the Marine Survey Office (MSO) the previous summer, a communication breakdown resulted in the required survey not being carried out before the expiration of the vessel's previous certification.
The MCIB advised boat owners and operators to be extra vigilant regarding the location of bilge pumps in their vessels.
It also warned that survey applications for certification "may not accommodate all situations", and that the issuing of a recepit is not a guarantee that an application is being dealt with.
The full report is available to download as a PDF from the MCIB website HERE.

A breach in the engine compartment caused the fishing vessel Ainmire to take on water and sink off the coast of Scotland in April last year, according to the official report into the incident.

All crew on board the vessel were transferred safetly to another fishing boat that responded to its distress call, some 30 miles northwest of the Butt of Lewis on the morning of 29 April 2010.

The Marine Casualty Investigation Board (MCIB) report concluded that the failure of a sea water cooling pipe in the engine room was the most likely cause of the flooding, and pointed to the fact that the pipework had not been renewed during the life of the vessel.

It was also noted that the bilge pump and its motors were located under the floor plates in the engine room, and thus were inoperable when the water level had risen in the compartment.

In addition, the MCIB report found that the Ainmire has been operating without a Fishing Vessel Safety Certificate for more than six months at the time of the incident.

Though the owner had submitted a survey application and paid the required fee to the Marine Survey Office (MSO) the previous summer, a communication breakdown resulted in the required survey not being carried out before the expiration of the vessel's previous certification.

The MCIB advised boat owners and operators to be extra vigilant regarding the location of bilge pumps in their vessels. 

It also warned that survey applications for certification "may not accommodate all situations", and that the issuing of a recepit is not a guarantee that an application is being dealt with.

The full report is available to download as a PDF from the MCIB website HERE.

Published in MCIB

About Electric outboard engines

The direct-drive component in electric outboard engines means that the electric motors are incredibly efficient compared to conventional marine combustion motors, operating with considerably higher torque whilst using less power.

Without any need for gears, cooling systems and moving parts the motors are maintenance free, highly efficient and economic to run.

As a result, electric boat engines are becoming more popular on Irish waters as the world transitions from fossil fuels to green energy.

To date, popular electric engine sizes have been trolling engines typically used by fishermen on lakes.

These marine engines are available in models that can be used in fresh water and sea water, for your boat or kayak.

Electric motors are Ideal for fishermen because they are quiet and create little in the way of disturbance 

Popular electric trolling models range from 30lb thrust to 55lb thrust in a range of shaft lengths.

But use is becoming broader now in 2021 and electric outboard engines are being used on small runabouts and RIBS where electric outboard engine sizes are getting bigger.

Outboard electric engines are economical and environmentally friendly. Battery technology is also improving at a rapid rate meaning they are becoming smaller and lighter and run for longer.

Built in hydro-generation provides alternative recharging options whilst under sail are also options meaning the electric outboard now has a home on the stern on small yachts and dayboats too.

As far back as 2014, Torqeedo owner Jack O'Keefe from Cork Harbour told Afloat readers of his sailing adventures in a Drascombe Coaster dinghy and how after swapping from a petrol version the rewards from his new electric outboard engine are less noise, no smells, more stowage, better sailing performance and a motor that can be started by a small child. But it's still not silent, there's a whine he says here 

Popular brands in Ireland are Torqeedo, ePropulsion, Pulsar and Minn Kota but there are more arriving all the time as the technology advances