Menu

Ireland's sailing, boating & maritime magazine

Displaying items by tag: Outboard Motor

There can be little worse than heading out for a day's boating only to find someone has stolen your outboard motor, leaving you to deal with the loss, painful insurance issues, the costly excess or replacement of the engine and a ruined weekend. Thefts tend to occur in areas where there are significant accumulations of boats with outboards, for example, marinas and boating clubs; however, the problem is nationwide and can also occur in isolated regions.

Combatting Outboard Motor Theft

The more visibly secure an engine is, the less likely it is that a thief will attempt to take it. Given the reduced rates of recovery success, prevention is better than cure. The first step owners should take is to ensure the most secure and suitable anti-theft device for their engine is installed. Owners also need to ensure that their insurance policy wording relating to anti-theft devices are complied with in full, to avoid the possibility of a claim being invalidated due to failure to comply with all policy wordings. No outboard is insured unless it is locked on with an insurance approved lock.

INSURANCE APPROVED ENGINE LOCKS

O'Sullivan's Marine is now able to supply MOTORLOC insurance approved outboard locks to the Irish market.

Atlantic Slot Lock

The Atlantic Slot Lock is the most substantial insurance approved outboard motor lock and is available in four lengths: 170mm, 195mm, 230mm, 260mm; each with a 14mm slot. A high-security locking head (HSH) is supplied as is a black dust cap and a rubber liner. Design specifically for smaller, clamp-mounted outboard engines.

s l300Atlantic Slot Lock

These are for use where an outboard engine is attached using the engine's clamping bracket. The slot in the lock covers the two clamp heads making it nearly impossible for a potential thief to get access to them.

Atlantic Slot Lock3

Choosing the right size: If you are unsure which Slot Lock you require, then measure across the width of your toggles once aligned up straight: If less than 150mm then an Atlantic 170 is required | If less than 160mm then an Atlantic 195 is required | If over 160mm then an Atlantic 230 is required | If above 190mm then an Atlantic 260 is required. Available from O'Sullivan's Marine, Co Kerry.

The Volcano

The Volcano Bolt Lock represents the pinnacle of insurance approved bolt lock development. It is now regarded by many in the industry as the best bolt lock on the market as it has been designed and built to resist removal by the most robust actions.

Volcano Bolt LockVolcano Bolt Lock

For through-transom bolted engine installations

As two stroke outboard motors become rarer and new heavier four-stroke outboard engines take their place, many owners of 8hp engines and above sensibly choose to bolt the engine through the transom in a semi-permanent installation to protect from outboard motor theft.

The Volcano bolt lock is intended for use with through-bolts that are coach, countersunk or stepped, so that should a thief attack the head of the bolt and remove it, they will be unable to hammer the bolt shank through the existing hole.

Volcano Bolt Lock 2Volcano Bolt Lock

The Volcano bolt-lock for through-transom bolted outboard engines has a 13mm diameter hole in the body unit. A stainless steel reducing bush is available to cut the gap to 10mm.

Motorloc insurance approved locks are made from high grade (nickel/chrome marine 316) stainless steel, incorporating marine friendly lock mechanisms that perform well in a saltwater/marine environment - High-quality locks that will last. All available from O'Sullivan's Marine, Co Kerry.

OTHER SECURITY MEASURES FOR COMBATTING THEFT

Further security measures include marking the engine somewhere with your own unique mark such as your Eircode, taking photographs and installing a motion-activated surveillance camera (MASC), which are very discrete and inexpensive to buy and install. These automatically photograph and/or record any movement, and wireless cameras have made surveillance possible in remote areas where it was not possible in the past.

When storing a boat, ashore consideration should be given to general security, such as lighting and ensuring that recorded CCTV covers the appropriate part of the yard being used.

Finally, there is some evidence of smaller engines being stolen from boats while they are afloat, so a collective effort is required by all concerned to be observant and to report any suspicious activity immediately to the Gardai.

For further information or advice on Insurance Approved Engine Locks contact O'SULLIVAN'S MARINE on 066-7124524, or visit www.osmarine.ie.

For trade enquiries please email: [email protected]

Published in O'Sullivan's Marine

About Dublin Port 

Dublin Port is Ireland’s largest and busiest port with approximately 17,000 vessel movements per year. As well as being the country’s largest port, Dublin Port has the highest rate of growth and, in the seven years to 2019, total cargo volumes grew by 36.1%.

The vision of Dublin Port Company is to have the required capacity to service the needs of its customers and the wider economy safely, efficiently and sustainably. Dublin Port will integrate with the City by enhancing the natural and built environments. The Port is being developed in line with Masterplan 2040.

Dublin Port Company is currently investing about €277 million on its Alexandra Basin Redevelopment (ABR), which is due to be complete by 2021. The redevelopment will improve the port's capacity for large ships by deepening and lengthening 3km of its 7km of berths. The ABR is part of a €1bn capital programme up to 2028, which will also include initial work on the Dublin Port’s MP2 Project - a major capital development project proposal for works within the existing port lands in the northeastern part of the port.

Dublin Port has also recently secured planning approval for the development of the next phase of its inland port near Dublin Airport. The latest stage of the inland port will include a site with the capacity to store more than 2,000 shipping containers and infrastructures such as an ESB substation, an office building and gantry crane.

Dublin Port Company recently submitted a planning application for a €320 million project that aims to provide significant additional capacity at the facility within the port in order to cope with increases in trade up to 2040. The scheme will see a new roll-on/roll-off jetty built to handle ferries of up to 240 metres in length, as well as the redevelopment of an oil berth into a deep-water container berth.

Dublin Port FAQ

Dublin was little more than a monastic settlement until the Norse invasion in the 8th and 9th centuries when they selected the Liffey Estuary as their point of entry to the country as it provided relatively easy access to the central plains of Ireland. Trading with England and Europe followed which required port facilities, so the development of Dublin Port is inextricably linked to the development of Dublin City, so it is fair to say the origins of the Port go back over one thousand years. As a result, the modern organisation Dublin Port has a long and remarkable history, dating back over 300 years from 1707.

The original Port of Dublin was situated upriver, a few miles from its current location near the modern Civic Offices at Wood Quay and close to Christchurch Cathedral. The Port remained close to that area until the new Custom House opened in the 1790s. In medieval times Dublin shipped cattle hides to Britain and the continent, and the returning ships carried wine, pottery and other goods.

510 acres. The modern Dublin Port is located either side of the River Liffey, out to its mouth. On the north side of the river, the central part (205 hectares or 510 acres) of the Port lies at the end of East Wall and North Wall, from Alexandra Quay.

Dublin Port Company is a State-owned commercial company responsible for operating and developing Dublin Port.

Dublin Port Company is a self-financing, and profitable private limited company wholly-owned by the State, whose business is to manage Dublin Port, Ireland's premier Port. Established as a corporate entity in 1997, Dublin Port Company is responsible for the management, control, operation and development of the Port.

Captain William Bligh (of Mutiny of the Bounty fame) was a visitor to Dublin in 1800, and his visit to the capital had a lasting effect on the Port. Bligh's study of the currents in Dublin Bay provided the basis for the construction of the North Wall. This undertaking led to the growth of Bull Island to its present size.

Yes. Dublin Port is the largest freight and passenger port in Ireland. It handles almost 50% of all trade in the Republic of Ireland.

All cargo handling activities being carried out by private sector companies operating in intensely competitive markets within the Port. Dublin Port Company provides world-class facilities, services, accommodation and lands in the harbour for ships, goods and passengers.

Eamonn O'Reilly is the Dublin Port Chief Executive.

Capt. Michael McKenna is the Dublin Port Harbour Master

In 2019, 1,949,229 people came through the Port.

In 2019, there were 158 cruise liner visits.

In 2019, 9.4 million gross tonnes of exports were handled by Dublin Port.

In 2019, there were 7,898 ship arrivals.

In 2019, there was a gross tonnage of 38.1 million.

In 2019, there were 559,506 tourist vehicles.

There were 98,897 lorries in 2019

Boats can navigate the River Liffey into Dublin by using the navigational guidelines. Find the guidelines on this page here.

VHF channel 12. Commercial vessels using Dublin Port or Dun Laoghaire Port typically have a qualified pilot or certified master with proven local knowledge on board. They "listen out" on VHF channel 12 when in Dublin Port's jurisdiction.

A Dublin Bay webcam showing the south of the Bay at Dun Laoghaire and a distant view of Dublin Port Shipping is here
Dublin Port is creating a distributed museum on its lands in Dublin City.
 A Liffey Tolka Project cycle and pedestrian way is the key to link the elements of this distributed museum together.  The distributed museum starts at the Diving Bell and, over the course of 6.3km, will give Dubliners a real sense of the City, the Port and the Bay.  For visitors, it will be a unique eye-opening stroll and vista through and alongside one of Europe’s busiest ports:  Diving Bell along Sir John Rogerson’s Quay over the Samuel Beckett Bridge, past the Scherzer Bridge and down the North Wall Quay campshire to Berth 18 - 1.2 km.   Liffey Tolka Project - Tree-lined pedestrian and cycle route between the River Liffey and the Tolka Estuary - 1.4 km with a 300-metre spur along Alexandra Road to The Pumphouse (to be completed by Q1 2021) and another 200 metres to The Flour Mill.   Tolka Estuary Greenway - Construction of Phase 1 (1.9 km) starts in December 2020 and will be completed by Spring 2022.  Phase 2 (1.3 km) will be delivered within the following five years.  The Pumphouse is a heritage zone being created as part of the Alexandra Basin Redevelopment Project.  The first phase of 1.6 acres will be completed in early 2021 and will include historical port equipment and buildings and a large open space for exhibitions and performances.  It will be expanded in a subsequent phase to incorporate the Victorian Graving Dock No. 1 which will be excavated and revealed. 
 The largest component of the distributed museum will be The Flour Mill.  This involves the redevelopment of the former Odlums Flour Mill on Alexandra Road based on a masterplan completed by Grafton Architects to provide a mix of port operational uses, a National Maritime Archive, two 300 seat performance venues, working and studio spaces for artists and exhibition spaces.   The Flour Mill will be developed in stages over the remaining twenty years of Masterplan 2040 alongside major port infrastructure projects.

Source: Dublin Port Company ©Afloat 2020.