Menu

Ireland's sailing, boating & maritime magazine

Displaying items by tag: Barracuda

Beneteau has been cultivating a community of sea angling enthusiasts around its Barracuda range — and international dealers will be sending their top bass fishermen to Brittany this coming May for the return of the Barracuda Tour.

With Le Crouesty as its home port, the boating ground for the no-kill competition will be the well-stocked waters of the Gulf of Morbihan for the third consecutive year.

“Bass is a legendary fish in the gulf,” says Roland Tabart, Mayor of Arzon and Chairman of the Gulf Tourist Office.

“It is wonderful that our boating grounds, already well-known to sailing enthusiasts, should promote other activities.”

From 10 to 18 May boats will fish out of Arzon in the Gulf of Morbihan in western France, starting with an amateur challenge whose winning crew will compete against the qualifiers from the selection tour in the grand finale from 15 May.

As previously reported on Afloat.ie, qualifiers will be held in Greystones next month to select the Irish competitors, with free entry for all Beneteau owners. Entry details are on Facebook.

Those who make it to Brittany will be fishing from the new custom-hull design commissioned by Irish Beneteau dealer BJ Marine, which recently showed off the Barracuda range at the Ireland Angling show.

Follow the preparations for the tour on the official Facebook page.

Published in BJ Marine

#militaryboat - Cobh-based boatbuilding company Safehaven Marine, has revealed footage of its new Barracuda vessel undergoing a high-speed boarding trial with the Irish Navy writes the Evening Echo.

The Barracuda which Afloat reported of its launch in 2015 is a high speed, low radar cross-section interceptor designed specifically for military and law enforcement roles.

One of the boat's most unique features is that a range of both lethal and non-lethal weapons can be concealed below deck and raised up through hatches only when required during conflict.

The Barracuda is also capable of operating with a high degree of invisibility to any opponent’s radar.

It recently underwent testing with the help of the Irish Navy and the Irish Maritime and Energy Research Cluster.

In a series of trials, the Barracuda was brought repeatedly alongside one of the naval vessels with the speeds being increased in each instance reaching a maximum of 20 knots.

According to Safehaven Marine, the vessel performed well remaining stable while alongside the naval vessel and able to break away easily.

In addition the Evening Echo notably reports separately on the construction by Safehaven Marine of an 18-metre long Wildcat 60 catamaran for the UK Ministry of Defence which will be used for a range of military purposes.

For more on this story, click here having scrolled down the page. 

Published in Boatyards

Cool as a cucumber in some very scary seas, watch Irish boat builder Frank Kowalski put two of his new Barracuda vessels through their paces off the Daunt Rock outside Cork Harbour on the South coast of Ireland. The video shows a 13m Barracuda II on rough weather sea trials alongside an 11m Barracuda I in 'Storm Desmond' with 6m seas and 60mph+ winds.

Safehaven Marine, based in Youghal, took advantage of the storms to perform rough weather sea trials of new vessels including a Wildcat 60 catamaran, and 18.5m ocean research vessel.

Read Afloat's previous posts on Safehaven's range of vessels here

 

Published in Safehaven Marine
Tagged under

#safehaven –A €1m-plus stealth style Irish built military vessel is creating waves along the Cork coast. 'Barracuda' is a new high speed Interceptor/Patrol vessel for military and law enforcement applications designed and built by Cork Harbour's Safehaven Marine.

Following a year and a half of design development and building work at its hi-tech manufacturing facility in East Cork, Cobh-based Safehaven Marine has unveiled the prototype of its latest design. And she's as mean as she looks!

Safehaven Marine is one of the world's top manufacturers of pilot boats and rescue vessels, and now the company hopes to use this new design to branch in to the world's military market.

The vessel can be produced at lengths of between 11 – 13m. Typical operational roles include patrol and surveillance duties around harbour installations and offshore anchorages, as well as high speed pursuit and apprehend when required. An array of both lethal and non lethal weapons can be carried concealed below decks in a separate compartment in the forward cabin, and raised when required. The vessel can be deployed by helicopter utilising its in-built lifting points on deck and at its 11m length, transported easily by ship or road.

Propulsion on the 11m version featured here is by conventional stern gear supplied by Clements Engineering and chosen for its weight carrying capabilities and durability, alternatively water jets can be fitted for higher speeds and low draft. Capable of maximum speeds of 40kts+ depending on the propulsion system and equipment installed, 'Barracuda' is fitted with a pair of Caterpillar C9 diesel engines rated at 560hp supplied by Finnings UK.

The innovative design of the vessel utilises various stealth technology's to produce a lower RCS (radar cross section), allowing it to operate with reduced degree of visibility to an adversary's radar. The design uses an innovative solution to weapon deployment. Various different types of both lethal and non-lethal weapons, including a remote control gyroscopically stabilised machine gun can be fitted to Barracuda. (A non functioning replica is fitted to the prototype featured here for demonstration purposes) In Barracuda the weapons are cleverly concealed below decks in the f/wd section of the superstructure, and are raised up to above deck level for deployment through large watertight carbon fibre hatches built into the f/wd cabins roof section. In this way when the vessel is in engaged in surveillance or patrol, the weapons are concealed and the vessels RCS signature is reduced. When the vessel is engaged in pursuit or apprehend modes, the weapons are raised for deployment.

Props_out_of_water.jpg

Airborne – Barracuda is powered by twin 560hp Caterpillars giving her lift off at a top speed of 38–knots for this Cork Harbour photo shoot

Another advantage being that the weapons are hidden when not in use for security, durability and covert reasons, as well as greatly reducing the vessels VCG when beneficial, such as in heavy weather. The superstructure and hull design utilises flat plane principles to its surfaces in its f/wd and side projections to deflect radar beams away from source, which together with specialized construction and outfitting, which include minimal metallic fittings exposed above decks, or where necessary being fully recessed. All of which combine to produce a vessel with a significantly lower than normal RCS.

The design however does not compromise on practicality or usability and provides for a high level of crew safety (wide side decks) for offshore boarding capabilities.

The vessel is constructed from advanced lightweight FRP cored composites, with extensive use of carbon fibre in its outfitting. Substantial in size yet lightweight Manuplas foam cored fenders with a polyurethane skin are used to minimise weight and offer maximum protection to the hull. The vessel can be moulded at lengths between 11m and 13m, and has a 4m beam, longer length versions benefit from a longer aft cockpit providing an increased working / crew area. The hull design below the waterline is an all new constant deadrise, twin chine deep V hull form capable of high speeds. A 22 degree deadrise at the transom and a wave piercing bow form, with a very fine wave cutting waterline entry at the bow of 70 degrees, which very effectively minimizes vertical accelerations at speed in waves, thereby maximising crew endurance. The hull provides exceptionally high levels of seakeeping abilities on all course, very much as one would expect from a builder renowned for its highly seaworthy pilot and S.A.R. vessels. The hull's special spray rail and twin chine arrangements provides for excellent spray suppression and on deck dryness, and her wide beam provides high levels of dynamic and static stability.

Barracuda.jpg

Not out of place in a James Bond film. This totally new hull has a constant deadrise Deep V with a wave piercing bow. Safehaven marine say they are just exploring its sea keeping abilities, but early reports say 'fantastic so far'! There is a really soft ride into a sea (see below) and good down wind in following seas even with such a fine bow

The design is capable of operating in up to sea state 7-8, and maintain operational speed in sea state 4-5, and can accommodate a crew of 4-6 in her main cabin, all on high tech shock mitigation seating supplied by X Craft, Holland.

As well as a full array of navigation equipment, a range of sonar equipment can be installed to monitor the underwater situation. FLIR Thermal and night vision infrared cameras are integrated for surveillance. A full digital Can Buss electrical system supplied by ETA has been integrated with all onboard systems controlled by touch screen computers at the helm and navigators positions, and expandable to potentially allow all crew members the ability to monitor and control the vessels navigation and onboard systems. Optionally ballistic protection can be incorporated to provide protection to the crew compartment utilizing lightweight composite ballistic panels. The front and side glass is ballistic and is directly bonded into moulded recesses without metallic frames. Barracuda will be produced alongside Safehaven's highly successful existing range of pilot, SAR vessels and patrol boats.

Big_wave_Barracuda.jpg

Big seas. Big test. 'Barracuda' during rough weather sea trials taking a pretty large breaking wave. Designed to have high levels of seakeeping and, depending on specification, she can be self righting as is the prototype here.  Barracuda is 11m  length overall. The top of the mast is 4.2m above the waterline so.... is this a 6m wave?...

barracuda_6mwave.jpg

....Yep..... it sure is..... pass the sickbag please!

Published in Safehaven Marine

Galway Port & Harbour

Galway Bay is a large bay on the west coast of Ireland, between County Galway in the province of Connacht to the north and the Burren in County Clare in the province of Munster to the south. Galway city and port is located on the northeast side of the bay. The bay is about 50 kilometres (31 miles) long and from 10 kilometres (6.2 miles) to 30 kilometres (19 miles) in breadth.

The Aran Islands are to the west across the entrance and there are numerous small islands within the bay.

Galway Port FAQs

Galway was founded in the 13th century by the de Burgo family, and became an important seaport with sailing ships bearing wine imports and exports of fish, hides and wool.

Not as old as previously thought. Galway bay was once a series of lagoons, known as Loch Lurgan, plied by people in log canoes. Ancient tree stumps exposed by storms in 2010 have been dated back about 7,500 years.

It is about 660,000 tonnes as it is a tidal port.

Capt Brian Sheridan, who succeeded his late father, Capt Frank Sheridan

The dock gates open approximately two hours before high water and close at high water subject to ship movements on each tide.

The typical ship sizes are in the region of 4,000 to 6,000 tonnes

Turbines for about 14 wind projects have been imported in recent years, but the tonnage of these cargoes is light. A European industry report calculates that each turbine generates €10 million in locally generated revenue during construction and logistics/transport.

Yes, Iceland has selected Galway as European landing location for international telecommunications cables. Farice, a company wholly owned by the Icelandic Government, currently owns and operates two submarine cables linking Iceland to Northern Europe.

It is "very much a live project", Harbourmaster Capt Sheridan says, and the Port of Galway board is "awaiting the outcome of a Bord Pleanála determination", he says.

90% of the scrap steel is exported to Spain with the balance being shipped to Portugal. Since the pandemic, scrap steel is shipped to the Liverpool where it is either transhipped to larger ships bound for China.

It might look like silage, but in fact, its bales domestic and municipal waste, exported to Denmark where the waste is incinerated, and the heat is used in district heating of homes and schools. It is called RDF or Refuse Derived Fuel and has been exported out of Galway since 2013.

The new ferry is arriving at Galway Bay onboard the cargo ship SVENJA. The vessel is currently on passage to Belem, Brazil before making her way across the Atlantic to Galway.

Two Volvo round world races have selected Galway for the prestigious yacht race route. Some 10,000 people welcomed the boats in during its first stopover in 2009, when a festival was marked by stunning weather. It was also selected for the race finish in 2012. The Volvo has changed its name and is now known as the "Ocean Race". Capt Sheridan says that once port expansion and the re-urbanisation of the docklands is complete, the port will welcome the "ocean race, Clipper race, Tall Ships race, Small Ships Regatta and maybe the America's Cup right into the city centre...".

The pandemic was the reason why Seafest did not go ahead in Cork in 2020. Galway will welcome Seafest back after it calls to Waterford and Limerick, thus having been to all the Port cities.

© Afloat 2020