Menu

Ireland's sailing, boating & maritime magazine

Displaying items by tag: Giant Cranes for Liverpool2

#GiantCranes – Giant Chinese constructed cantilever rail-mounted gantry (CRMG) cranes arrived by heavylift vessel to Peel Ports Liverpool2 new £300m deep-water container terminal over the May Bank Holiday, writes Jehan Ashmore.

The CRMG cranes, the first of six are to be installed at Liverpool2, the Merseyside quayriver facility (not Liverpool Docks) to berth considerably larger and deep draft containerships. Docking at the port development was heavylift vessel, Zhenhua 25 that set off with the cranes from Nantong,China on the 11,930nm/20,000km voyage to Liverpool.

The 40 day passage of Zhenhua 25, took a route via south-east Asia, India, the Arabian Peninsula and through the Suez Canal before finally completing the voyage to Liverpool last Sunday.

On the opposite side of the Irish Sea, the Peel Port Group are the operators of the Dublin Port container terminal, Marine Terminal Ltd. At  the MTL terminal near Ringsend, one of the largest vessels ships to use the facility, Nicholas Delmas (capacity: 2,207 TEU's) departed yesterday.

The Chinese built Nicholas Delmas had arrived from Liverpool from where the new quayside CRMG cranes to be installed having been also constructed by a Chinese manufacturer, ZPMC. According to the Peel Ports Liverpool, ZPMC also supplied the five ship-to-shore cranes already on site at the entrance to the port.

This first batch of CRMG's are the first of 12 required for phase 1 of the terminal. Ultimately the site will have eight STS and 22 CRMG cranes as part of a £100m investment.

The cranes will be capable of performing an average of 20 moves per hour, with semi-automated control linked to the port’s new Navis N4 terminal operating system. They have a 40 tonne under-spreader capacity and a maximum container lift height above quay level of 21m under spreader (6+1 containers).

Liverpool2 is to have a phased opening, with marine trials due to begin shortly and other elements of the semi-automated terminal coming online throughout Q2 of 2016. The first phase of the new terminal will be fully operational in the autumn.

Published in Ports & Shipping

About Rosslare Europort

2021 sees Rosslare Europort hitting a new record with a total of 36 shipping services a week operating from the port making it one of the premier Irish ports serving the European Continent. Rosslare Europort is a gateway to Europe for the freight and tourist industries. It is strategically located on the sunny south-east coast of Ireland.

Rosslare is within a 90-minute driving radius of major Irish cities; Dublin, Cork and Limerick. Rosslare Europort is a RoRo, RoPax, offshore and bulk port with three RoRo berths with a two-tier linkspan, we also have a dedicated offshore bulk berth.

Exports in Rosslare Europort comprise mainly of fresh products, food, pharmaceuticals, steel, timber and building supplies. While imports are largely in the form of consumer goods such as clothes, furniture, food, trade vehicles, and electronics.

The entire Europort is bar-swept to 7.2 meters, allowing unrestricted access to vessels with draughts up to 6.5 metres. Rosslare Europort offers a comprehensive service including mooring, stevedoring and passenger-car check-in for RoRo shipping lines. It also provides facilities for offshore, dry bulk and general cargo.

The port currently has twice-daily round services to the UK and direct services to the continent each day. Rosslare Europort has a fleet of Tugmasters service, fork-lift trucks, tractors and other handling equipment to cater for non-standard RoRo freight.