Menu

Ireland's sailing, boating & maritime magazine

Displaying items by tag: Big Lift

Three huge cranes which left Cork Harbour at the end of August have arrived at their final destination the New York area, as RTÉ News reports.

Tom MacSweeney covered the three Limerick-built cranes upon their departure from Port of Cork on board the Big Lift Baffin for their transatlantic journey.

As our own Jehan Ashmore previously wrote, the three 150m ship-to-shore (STS) Liebherr cranes represent the largest single objects ever engineered in Ireland.

Logistics for transporting the massive ‘megamax’ cranes were complicated by the presence of the Bayonne Bridge connecting New York and New Jersey, which has a clearance less than half that of their fully assembled height.

But the Big Lift successfully passed the bridge on schedule on Saturday afternoon (10 September) and the cranes will now be installed at Maher Terminals at Port Newark in New Jersey.

RTÉ News has more on the story HERE.

Published in Port of Cork

Crowds lined the Riverside from Monkstown to Cobh in Cork Harbour this afternoon as the Big Lift Baffin left Cork Dockyard with three heavy lift cranes aboard bound for New York.

Two Cork Port tugs assisted the ship leaving the Dockyard. It went astern out to the centre of Monkstown Bay and was then turned bow on to leave the harbour down past Cobh, Whitegate and Roche"s Point for the ten-day voyage to the US.

Big Lift heading for sea and New YorkBig Lift heading for sea and New York

For more read Afloat's earlier report on the Big Lift Baffin here

Crowds watching Big Lift Baffin depart Cork DockyardCrowds watching Big Lift Baffin depart Cork Dockyard

Bob Bateman's Big Lift Photo Gallery Below

Published in Port of Cork

Shipyards

Afloat will be focusing on news and developments of shipyards with newbuilds taking shape on either slipways and building halls.

The common practice of shipbuilding using modular construction, requires several yards make specific block sections that are towed to a single designated yard and joined together to complete the ship before been launched or floated out.

In addition, outfitting quays is where internal work on electrical and passenger facilities is installed (or upgraded if the ship is already in service). This work may involve newbuilds towed to another specialist yard, before the newbuild is completed as a new ship or of the same class, designed from the shipyard 'in-house' or from a naval architect consultancy. Shipyards also carry out repair and maintenance, overhaul, refit, survey, and conversion, for example, the addition or removal of cabins within a superstructure. All this requires ships to enter graving /dry-docks or floating drydocks, to enable access to the entire vessel out of the water.

Asides from shipbuilding, marine engineering projects such as offshore installations take place and others have diversified in the construction of offshore renewable projects, from wind-turbines and related tower structures. When ships are decommissioned and need to be disposed of, some yards have recycling facilities to segregate materials, though other vessels are run ashore, i.e. 'beached' and broken up there on site. The scrapped metal can be sold and made into other items.