Menu

Ireland's sailing, boating & maritime magazine

Displaying items by tag: Harbour Porpoises

#MarineWildlife - Via the Irish Whale and Dolphin Group (IWDG) comes news that the European Commission (EC) is asking the United Kingdom to designate protected areas for the harbour porpoise.

The EU legislation on the conservation of natural habitats and of wild fauna and flora (Habitats Directive) requires member states to propose a list of protection sites for a number of species that are native to their territory, ensuring their protection from interventions which could seriously compromise their ecological character.

Despite a large number of harbour porpoise – a protected marine species in the Republic of Ireland – regularly found in its waters, the UK has, according to the EC, "so far proposed only one small site in Northern Ireland, exposing some of the identified sites to the risk of offshore wind farm development."

The EC adds that it has "repeatedly urged the UK to fulfil its key obligations for this species, but no further designations of sites have been proposed."

This current acton by the EC follows a letter of formal notice sent to the UK government in June 2013. If the UK fails to reply within two months, the commission may refer the case to the EU Court of Justice.

Published in Marine Wildlife

#MarineWildlife - The Irish Whale and Dolphin Group (IWDG) has welcomed the designation of a new special area of conservation (SAC) for marine wildlife in Dublin Bay.

As reported yesterday on Afloat.ie, Heritage Minister Jimmy Deenihan was on board the IWDG's research vessel Celtic Mist in Dun Laoghaire on Tuesday 16 July to lance the group's new atlas of marine mammal distribution in Irish waters - an event at which he also confirmed his extension of the protections already afforded to whales and dolphins over a number of coastal sites around Ireland.

The Dublin Bay SAC, running from Rockabill off Skerries to Dalkey Island, is one of the six new sites proposed by the minister's department late last year.

The list also features Blackwater Bank in Co Wexford, the West Connacht Coast, Hempton's Turbot Bank in Donegal, the Porcupine Bank Canyon off Kerry and the South-East Rockall Bank.

According to The Irish Times, the Dublin Bay conservation zone alone covers a sea area of 27,000 hectares and will extend protections under the 1992 EU Habitats Directive to the area's population of harbour porpoises.

Published in Marine Wildlife

#PORPOISES - The Irish Whale and Dolphin Group (IWDG) has expressed concern over the potential impact of a 2D seismic survey on harbour porpoises in Dublin Bay

As recently reported on Afloat.ie, Providence Resources has been granted a foreshore license for the Dalkey Island Prospect in the Kish Bank Basin to allow for a well site survey, and exploration well and a seismic survey. 

But the IWDG has written to Minister of State Jan O'Sullivan suggesting that he Environmental Risk Assessment (ERA) conducted on the area is deficient.

The group argues that the ERA has not assessed the footprint of the seismic survey, saying the mitigation proposed is inadequate and that the disturbance and impact to cetaceans – especially harbour porpoise – is "potentially significant and in contravention of national legislation and EU Directives".

Moreover, the IWDG claims that an Environmental Impact Assessment (EIA) of the effect of a seismic survey on harbour porpoise "doesn’t seem to have been carried out".

The harbour porpoise, which is an Annex II species, is entitled to strict protection. The species has been recorded at very high densities in Dublin Bay during surveys carried out by the IWDG in 2008 on behalf of the National Parks and Wildlife Service (NPWS).  

The group says that impact monitoring is needed to gather data on the effects of seismic surveys on harbour porpoises, and recommends it as an additional condition on the license.

"Compliance with the NPWS guidelines does not constitute monitoring and as porpoises are elusive and spend 95% of their time underwater and are difficult to see in a sea state greater than Force 1, the guidelines do not serve to protect them once the works are on-going.

"In addition there are specific data required on their site usage prior to the works and a monitoring plan to assess how they recover after the works."

Moreover, the IWDG claims that in this instance the NPWS "are negligent, as they are not providing strict protection to an Annex II species."

Earlier this year Environment Minister Phil Hogan rejected a call from Tánaiste Eamon Gilmore and others for a public enquiry into the Dalkey Island foreshore licence.

Published in Marine Wildlife

About the 29er Skiff Dinghy

The 29er is a one-design double-handed, single trapeze skiff for youth sailors.

There is an active class in Ireland, just one of the 38-countries from across all continents now racing the high-performance skiff.

The 29er is one of the latest dinghy classes to arrive in Ireland and has a 50/50 split between boys and girls.

The class like to describe the boat as "The most popular skiff for sailors who want to go fast!".

Derived from the Olympic class 49er class and designed by Julian Bethwaite the 29er was first produced in 1998.

Two sailors sail the 29er, one on trapeze.

The class is targeted at youth sailors aiming at sailing the larger 49er which is an Olympic class.


The 6.25-metre high rig features a fractional asymmetrical spinnaker; a self-tacking jib decreases the workload of the crew, making manoeuvres more efficient and freeing the crew to take the mainsheet upwind and on two-sail reaches.

The 15.00 m2 spinnaker rigging set-up challenges crews to be fit and coordinated, and manoeuvres in the boat require athleticism due to its lack of inherent stability and the high speed with which the fully battened mainsail and jib power up.

The 74kg weight hull is constructed of fibreglass-reinforced polyester in a foam sandwich layout.

The fully battened mainsail and jib are made from a transparent Mylar laminate with orange or red Dacron trimming, while the spinnaker is manufactured from ripstop Nylon.

The mast is in three parts - an aluminium bottom and middle section, with a polyester-fibreglass composite tip to increase mast bend and decrease both overall weights, and the capsizing moment a heavy mast tip can generate. Foils are aluminium or fibreglass.

About the ILCA/Laser Dinghy

The ILCA, formerly known as the Laser, is the most produced boat in the world, with 220,000 units built since 1971.

It's easy to see why the single-handed dinghy has won the title of the most widely distributed boat of all time.

The Laser is a one-design dinghy, the hulls being identical but three rigs that can be used according to the size and weight of the sailor.

The class is international, with sailors from 120 countries. The boat has also been an Olympic class since 1996, being both the men's and women's singlehanded dinghy.

Three rigs are recognised by the International Laser Class Association (ILCA):

  • ILCA 4: sail of 4.70m2
  • ILCA 6: sail of 5.76 m2
  • ILCA 7: sail of 7.06 m2

29er skiff technical specs

  • Hull weight 74kg (163lb)
  • LOA 4.45m (14.4ft)
  • Beam 1.77m (5ft 7in)
  • Crew 2 (single trapeze) 
  • Spinnaker area 15.00 m2 (181.2sq.ft)
  • Upwind sail area 12.5 m2 (142.0 sq.ft)
  • Mast length 6.25m (20.5ft)

Featured Sailing School

INSS sidebutton

Featured Clubs

dbsc mainbutton
Howth Yacht Club
Kinsale Yacht Club
National Yacht Club
Royal Cork Yacht Club
Royal Irish Yacht club
Royal Saint George Yacht Club

Featured Brokers

leinster sidebutton

Featured Webcams

Featured Associations

ISA sidebutton
ICRA
isora sidebutton

Featured Marinas

dlmarina sidebutton

Featured Chandleries

CHMarine Afloat logo
https://afloat.ie/resources/marine-industry-news/viking-marine

Featured Sailmakers

northsails sidebutton
uksails sidebutton
watson sidebutton

Featured Blogs

W M Nixon - Sailing on Saturday
podcast sidebutton
BSB sidebutton
wavelengths sidebutton
 

Please show your support for Afloat by donating