Menu

Ireland's sailing, boating & maritime magazine

Displaying items by tag: Monohull aluminium craft

The saga of Thor Gitta's prolonged stay in Galway to load two former Aran Islands ferries bound for Mauritius, culminated with the cargoship's departure this morning, writes Jehan Ashmore.
Due to a series of incidents, mishaps and delays the Thor Gitta has been at the centre of attention. Crowds of Galwegians witnessed the loading of both ferries during the past week.

First to be loaded was the Clann na nOileáin on Wednesday in an operation than took four-hours while on Friday her sister Clann Eagle I took six-hours to be winched safely onto the cargo-deck during freshening winds.

It is ironic that since Thor Gitta 's arrival to the port's Dún Aengus Dock on 5 April that it would also nearly be the same time taken for the estimated 25-day delivery voyage of the ferries to the Indian Ocean island.

During the 8,300 mile journey Thor Gitta will make several port of calls with the first call to La Rochelle. The Bay of Biscay port is the next largest port south of Les Sables d'Olonnes, where the fast-ferries where built at the OCEA boatyard for her original owners Bád Arann Teoranta which traded as Aran Direct on routes from Rossaveal to the islands.

Thor Gitta was built in 1996 and is also designed to carry 364 TEU (twenty-foot equivilant unit) containers and belongs to an-eight strong fleet operated by the Danish company, Thor Rederi A/S of Svendborg.

One of the reasons why the heavylift vessel was delayed in loading was to ensure the correct positioning of the ferries so not to further disrupt other port call cargo allocation while on the long repositioning voyage to Mauritius.

The 4,078 tonnes cargsoship is also scheduled to make en-route calls to Pointe Noir in the Congo, Cape Town and Pemba in Mozambique before finally reaching the southern Indian Ocean destination.

When the ferries were completed in 2005 and 2006 they were valued between €5-6m but they only served up to September 2008 when the 243 passenger aluminium built craft were laid-up at the Connemara harbour due to financial difficulities.

This led to the company going into receivership and the vessels were put up for auction in Galway last February. Despite bids reaching €950,000, they were withdrawn at the auction hosted by the Cork based auctioneer, Dominic J. Daly.

In the following month the fast-ferries were sold to the French owner for a new career based from the island state which is in the Mascarene Islands. Mauritius is neighboured by the smaller islands of Agalega, Cargados Carajos, Rodrigues and the French island of Réunion some 200km to the southwest.

Published in Ports & Shipping

About the 29er Skiff Dinghy

The 29er is a one-design double-handed, single trapeze skiff for youth sailors.

There is an active class in Ireland, just one of the 38-countries from across all continents now racing the high-performance skiff.

The 29er is one of the latest dinghy classes to arrive in Ireland and has a 50/50 split between boys and girls.

The class like to describe the boat as "The most popular skiff for sailors who want to go fast!".

Derived from the Olympic class 49er class and designed by Julian Bethwaite the 29er was first produced in 1998.

Two sailors sail the 29er, one on trapeze.

The class is targeted at youth sailors aiming at sailing the larger 49er which is an Olympic class.


The 6.25-metre high rig features a fractional asymmetrical spinnaker; a self-tacking jib decreases the workload of the crew, making manoeuvres more efficient and freeing the crew to take the mainsheet upwind and on two-sail reaches.

The 15.00 m2 spinnaker rigging set-up challenges crews to be fit and coordinated, and manoeuvres in the boat require athleticism due to its lack of inherent stability and the high speed with which the fully battened mainsail and jib power up.

The 74kg weight hull is constructed of fibreglass-reinforced polyester in a foam sandwich layout.

The fully battened mainsail and jib are made from a transparent Mylar laminate with orange or red Dacron trimming, while the spinnaker is manufactured from ripstop Nylon.

The mast is in three parts - an aluminium bottom and middle section, with a polyester-fibreglass composite tip to increase mast bend and decrease both overall weights, and the capsizing moment a heavy mast tip can generate. Foils are aluminium or fibreglass.

About the ILCA/Laser Dinghy

The ILCA, formerly known as the Laser, is the most produced boat in the world, with 220,000 units built since 1971.

It's easy to see why the single-handed dinghy has won the title of the most widely distributed boat of all time.

The Laser is a one-design dinghy, the hulls being identical but three rigs that can be used according to the size and weight of the sailor.

The class is international, with sailors from 120 countries. The boat has also been an Olympic class since 1996, being both the men's and women's singlehanded dinghy.

Three rigs are recognised by the International Laser Class Association (ILCA):

  • ILCA 4: sail of 4.70m2
  • ILCA 6: sail of 5.76 m2
  • ILCA 7: sail of 7.06 m2

29er skiff technical specs

  • Hull weight 74kg (163lb)
  • LOA 4.45m (14.4ft)
  • Beam 1.77m (5ft 7in)
  • Crew 2 (single trapeze) 
  • Spinnaker area 15.00 m2 (181.2sq.ft)
  • Upwind sail area 12.5 m2 (142.0 sq.ft)
  • Mast length 6.25m (20.5ft)

Featured Sailing School

INSS sidebutton

Featured Clubs

dbsc mainbutton
Howth Yacht Club
Kinsale Yacht Club
National Yacht Club
Royal Cork Yacht Club
Royal Irish Yacht club
Royal Saint George Yacht Club

Featured Brokers

leinster sidebutton

Featured Webcams

Featured Associations

ISA sidebutton
ICRA
isora sidebutton

Featured Marinas

dlmarina sidebutton

Featured Chandleries

CHMarine Afloat logo
https://afloat.ie/resources/marine-industry-news/viking-marine

Featured Sailmakers

northsails sidebutton
uksails sidebutton
watson sidebutton

Featured Blogs

W M Nixon - Sailing on Saturday
podcast sidebutton
BSB sidebutton
wavelengths sidebutton
 

Please show your support for Afloat by donating