Menu

Ireland's sailing, boating & maritime magazine

Displaying items by tag: Discussions

The European Sea Ports Organisation (ESPO) urges the European Parliament and Council to fully align the maritime pillar of the proposal for an Alternative Fuel Infrastructure Regulation (AFIR) with the FuelEU Maritime proposal.

While the discussions on the AFIR proposal are progressing fast in the Intermodal Working Party of the Council with compromise proposals already being in the making, the Fuel EU maritime proposal is only in a very preliminary stage of discussions in the Shipping Working Party.

For Europe’s ports it is essential that these proposals are discussed together and are fully aligned. If not, the whole aim of this exercise, namely a coordinated approach to match demand and supply for alternative fuels and technologies for shipping, is undermined.

“We understand the sense of urgency for the Fit for 55-package, but this must not endanger the careful matching of requirements on ports to deploy onshore power supply with the requirements on the use of these installations as foreseen in the FuelEU Maritime proposal. It is not possible to deploy the required infrastructure without any guarantees that it will be used by ships at berth. These two proposals must mirror each other to truly solve the chicken and egg discussions. An agreement on AFIR cannot be made without considering what will be discussed and agreed in Fuel EU,” says ESPO’s Secretary General Isabelle Ryckbost.

In particular, ESPO asks for a full alignment of Article 9 of the AFIR proposal with Articles 4 and 5, as well as Annex III of the FuelEU Maritime proposal.

The same degree of coordination between the two files must take place in the European Parliament, where the rapporteurs on the different files have just been appointed.

“We understand that different proposals of the Fit for 55-package will be discussed under the Joint Committee procedure. We welcome such a coordinated approach between different EP committees, but believe that coordination between the different specific proposals, in particular the AFIR and FuelEU, is equally important. We do hope that the different rapporteurs and shadows on these proposals are working together to reach a coherent package which delivers the emissions reductions needed,” adds Isabelle Ryckbost.

On 14 July the Commission issued a proposal for an Alternative Fuel Infrastructure Regulation (reviewing the current Directive of 2014) together with a new proposal regulating the use of alternative clean fuels and onshore power supply by shipping, the so-called Fuel EU maritime proposal as part of the Fit for 55-package. By introducing specific rules to mandate the use of OPS or other equivalent technologies, the Commission recognised the importance of a coordinated approach to match supply and demand by introducing a tool that establishes increased levels of demand of renewable and low-carbon maritime fuels and technologies.

ESPO looks forward to discussing the Fit for 55-proposals with the Commission, European Parliament and Council, and to working together with the relevant EU policy makers to deliver an ambitious and coherent Fit for 55-package that is fit for purpose.

Published in Ports & Shipping

Beneteau 211 sailing in Ireland

A small, fast cruiser/racer – in style very much a miniature Open 60 or early Figaro, the Beneteau First 211 offers high sailing performance for her size, plus simple accommodation for up to four people.
The boat is very dinghy-style to sail, although the keel makes her self-righting, and foam buoyancy renders her unsinkable, according to the French manufacturer.

Designed by Groupe Finot and introduced in 1998 as a replacement model for the 1992 model First 210, the Beneteau First 211 is a small high-performance yacht designed to be simple to sail and take the ground or be trailed. The words' pocket rockets' tend to be used to describe these boats!
The design was revised to become the Beneteau First 21.7 in 2005. All three models, 210, 211 and 21.7, are very similar in style and concept and share many actual components.

The hull of the Beneteau First 211 is solid GRP, with sandwich construction for the deck moulding. There is foam buoyancy at the bow and stern, guaranteeing unsinkability. The ballasted drop keel is raised by a manual jack and allows easy transport of the boat and drying out if required, supported level by the twin rudders.
The sailplan has a non-overlapping jib to keep sheet loads down and a large spinnaker to achieve high speeds downwind. With almost six foot of draught with keel down and twin rudders for control, upwind performance is also excellent.

The design is popular in Ireland's boating capital at Dun Laoghaire Harbour, where up to a dozen race as part of a one-design class in regular Dublin Bay Sailing Club racing. The boats also race for national championship honours annually. The boats are kept on Dun Laoghaire Marina and look all the more impressive as the fleet of pocket rocket racers are all moored together on one pontoon.

At A Glance – Beneteau First 211 Specifications

LOA: 6.2m (20ft 4in)

Draught: 1.8m to 0.65m (5ft 11in to 2ft 2in)

Displacement: 1,100kg (2,200lb)

LWL: 6m (19ft 7in)

ARCHITECT
• Finot Conq et Associés

Featured Sailing School

INSS sidebutton

Featured Clubs

dbsc mainbutton
Howth Yacht Club
Kinsale Yacht Club
National Yacht Club
Royal Cork Yacht Club
Royal Irish Yacht club
Royal Saint George Yacht Club

Featured Brokers

leinster sidebutton

Featured Webcams

Featured Associations

ISA sidebutton
ICRA
isora sidebutton

Featured Marinas

dlmarina sidebutton

Featured Chandleries

CHMarine Afloat logo
https://afloat.ie/resources/marine-industry-news/viking-marine

Featured Sailmakers

northsails sidebutton
uksails sidebutton
watson sidebutton

Featured Blogs

W M Nixon - Sailing on Saturday
podcast sidebutton
BSB sidebutton
wavelengths sidebutton
 

Please show your support for Afloat by donating