Displaying items by tag: Log of the Molly B

7th March 2013

Lecture: ‘The Log of the Molly B' Sailing Around the World

#Lecture – Dubliner Pete Hogan, a well-known artist specialising in painting boats is to present a lecture titled "The Log of the Molly B - Building and sailing a gaff-rigged ketch around the World".

The lecture takes place next Wednesday 13 March at 20:00 in Poolbeg Yacht and Boat Club, Ringsend, in the heart of Dublin Port.

Pete has been sailing all his life usually out of Dun Laoghaire but also in the Clew Bay area of Mayo. He worked as a commercial fisherman, as a deck hand on yachts and in the office of a paper company. In 1975 he emigrated to Vancouver, Canada.

Three years later he said 'To hell with this. I'm going to build a boat... ' He built a 30 foot double ended gaff rigged ketch and sailed it through the Panama Canal and back to Ireland without motor or electronics.

He then sailed Molly B around the World by way of the infamous Cape Horn. Embarking on a third voyage, Molly B sank in a storm in the Mediterranean and he was lucky to survive.

Pete recently published an illustrated book about his adventures with Molly B and this forms the basis of his talk and slide show.

The talk is part of the les Glénans Irish Sector Winter Lecture Series. All are welcome. Entry fee of €5 in aid of the RNLI. For further details contact: 087 2129614

Published in Boating Fixtures

Tagged under

About the TP52 Racing Yacht

The TP52 racing yacht is a remarkable example of cutting-edge technology in the world of competitive yachting. Measuring 52 feet (15.85 metres) in length, this vessel is constructed entirely from carbon fibre, making it an incredibly light and agile craft.

The TP52 features a 6.25-metre high rig, complete with a fractional asymmetrical spinnaker and a self-tacking jib. This design reduces the workload of the crew, allowing for more efficient manoeuvres and freeing up the crew to focus on the mainsheet upwind and on two-sail reaches.

The spinnaker rigging set-up, measuring 15.00 m2, presents a challenge to even the most experienced crews, requiring them to be fit and perfectly coordinated. Maneuvering the boat requires athleticism due to the vessel's lack of inherent stability and the high speed generated by the fully battened mainsail and jib.

The TP52's hull is constructed of fibreglass-reinforced polyester in a foam sandwich layout, resulting in a weight of just 74kg. The fully battened mainsail and jib are made from a transparent Mylar laminate with orange or red Dacron trimming, while the spinnaker is manufactured from ripstop Nylon.

The mast is made up of three parts, featuring an aluminium bottom and middle section, with a polyester-fibreglass composite tip to increase mast bend and decrease overall weight. The capsizing moment, which can be generated by a heavy mast tip, is also reduced through this design. The TP52's foils are constructed from either aluminium or fibreglass, depending on the specific requirements of the vessel.

Overall, the TP52 racing yacht is an exceptional example of the latest advancements in yacht design and technology. Its lightweight construction, advanced rigging, and high-speed capabilities make it a top contender in the world of competitive yachting, challenging even the most skilled and experienced crews.