Menu

Ireland's sailing, boating & maritime magazine

Displaying items by tag: Casla Bay

The loading of the second former Aran Island ferry, Clann Eagle I onto the cargoship Thor Gitta in Galway has finally been completed today, writes Jehan Ashmore.
The 4,078 tonnes vessel is scheduled to depart the mid-western port tomorrow evening on the 8,300 mile delivery voyage to Mauritius.

Despite freshening winds the 169 gross registered tonnes ferry was winched out of the waters of the port's Dún Aengus Dock. In total the operation took six-hours which saw the delicate positioning of the 27m long ferry between the ship's two deck-mounted cranes and lowered onto the cargo-deck.

Yesterday proceedings to load the ferry were suspended due to delays in relocating other cargo so to accommodate the 243 passenger capacity ferry. This followed the loading of her sister Clann na nOileáin on Wednesday.

Several previous attempts to hoist the Clann Eagle I onto the deck of the Danish-flagged vessel have been hampered. At one stage due to complications in efforts to transport the vessels, the 100m Thor Gitta was temporary detained by the admiralty marshal.

Procedures to load the 29 knots fast-ferry pair have been beset with incidents notably the grounding and subsequent damage to the first chartered cargoship, Patanal, off Rossaveal. It was originally planned to sail the ferries out into Casla Bay where the German-flagged vessel would load them onboard.

As a consequence the ferries were transferred to Galway where the Clann na nOileáin did not escape attention either. On the first attempt to load the ferry one of the ship's slings snapped from the crane-cradle causing the 172 tonnes ferry to fall into the water.

Minor damage was caused to the ferry, though three men who remained onboard at the time of the incident were taken to hospital but were later released.

Last month the ferries were sold to a French buyer after the company that owned them Bád Arann Teoranta (trading as Aran Direct) went into receivership. The ferries operated on several routes between Rossaveal to the islands but are now destined to serve on an inter-island service from the Indian Ocean island.

Published in Ports & Shipping

Waszp sailing

The Waszp project was conceived in 2010 by Andrew McDougall, designer of the world-beating Mach 2 foiling Moth. 

The Waszp was created as a strict one-design foiler, where, as the class says “the true test when raced is between crews and not boats and equipment”.

The objective of the class rules is to ensure that this concept is maintained. Keeping possible modifications to a minimum ensures fair racing across the fleet, helps to reduce the overall cost to the sailor and reduces the amount of time in the workshop. 

The popularity of the WASZP has proven that the boat and the concept work. In October 2021, 1237 boats had been sold to over 45 countries. 

The top speed recorded on the foiling dinghy is 26.7 knots. 

60-95kgs+ is a weight range competitive across varied conditions with rigs knowns as ‘8.2’ and ‘6.9’.

The cost of a Moth dinghy in Europe is €14,400 inc VAT + shipping according to the manufacturers in October 2021.