Menu

Ireland's sailing, boating & maritime magazine

Displaying items by tag: salvage pump

#LIFEBOATS - Ballycotton's RNLI lifeboat was dispatched in poor conditions Wednesday evening to fishing boat taking on water some 20 miles south east of the Co Cork town, FishNewsEU.com reports.

Assisted by the Waterford coastguard helicopter Rescue 117, the lifeboat stood by the Irish-registered fishing vessel as its four-man crew kept the water intake under control and headed towards Ballycotton harbour under its own power.

Once returned to port, an RNLI salvage pump was placed aboard the boat to extract the excess water, and the crew offered thanks to the emergency services for their assistance.

Published in RNLI Lifeboats

After the publication of the MCIB investigation report into the sinking of Asgard II the dive team lead by Eoin McGarry have released further photos of the wreck, showing different aspects of the boat including new shots of the hole in the hull. 

asgardholediver

The "hole" in Asgard's Hull as it looked in July 2010 on the starboard bow, the long plank that was in the MCIB report pictures has fallen down and can no longer be seen. The view of the hole is harder to get now as the hull is listed to starboard and the seabed is silting up on the starboard bow and scouring on the port aft quarter and stern

pump

The salvage pump used. It is located midships on the starboard side

books

A selection of nautical reading material still remarkably intact. The photo of the bookshelf is taken in the absence of the roof/deck of the navigation room. This is directly forward of the helm, the door out of the navigation room was just to the left of the books as you look at them

Click this link for all Afloat's coverage of Asgard II's sinking, and the plans to raise, dive and replace her

Raise the Asgard - Afloat's 2008 online petition

Published in Asgard II

Waszp sailing

The Waszp project was conceived in 2010 by Andrew McDougall, designer of the world-beating Mach 2 foiling Moth. 

The Waszp was created as a strict one-design foiler, where, as the class says “the true test when raced is between crews and not boats and equipment”.

The objective of the class rules is to ensure that this concept is maintained. Keeping possible modifications to a minimum ensures fair racing across the fleet, helps to reduce the overall cost to the sailor and reduces the amount of time in the workshop. 

The popularity of the WASZP has proven that the boat and the concept work. In October 2021, 1237 boats had been sold to over 45 countries. 

The top speed recorded on the foiling dinghy is 26.7 knots. 

60-95kgs+ is a weight range competitive across varied conditions with rigs knowns as ‘8.2’ and ‘6.9’.

The cost of a Moth dinghy in Europe is €14,400 inc VAT + shipping according to the manufacturers in October 2021.