Menu

Ireland's sailing, boating & maritime magazine

Displaying items by tag: First cruiseship of 2017

#CruiseFirst - A pair of Fred Olsen Lines sisters marked both the last cruise call to Dublin Port in 2016 and as the first of the New Year, writes Jehan Ashmore.

The conservative yet handsome profile of Boudicca sailed into Dublin at dawn. The 880 passenger cruiseship had sailed from the opposite side of the Irish Sea having cast off mooring ropes from Liverpool’s famous waterfront. The ship had berthed at the cruise terminal located near the landmark buildings known as the ‘Three Graces’.

On boards are cruise-goers taking in the early New Year sights and visiting tourist attractions of Dublin's 'Fair City' before Boudicca sets sail this evening at 18.00hrs. The next port of call been Southampton. Likewise of the Irish capital, the Hampshire port is the UK’s busiest for cruiseships along with trading in general cargo, notably through giant ocean-going containerships.

Within the last fortnight sister, Black Watch had too disembarked tourists to visit Dublin which in 2016 the port welcomed 112 cruiseships.

The veteran vessels of 28,000 gross tonnage each and dating to the 1970’s belong to an increasing rare breed of first generation cruiseships. With the passing of more than four decades they have become by default yet even more pleasing to the aesthestic eye.

In comparison to some of the behemoths of modern day cruiseships and newbuilds that will descend into the Dublin Port of the future using a new cruise €30m terminal granted planning permission.

The facility a first for the port is part of the Alexandra Basin Redevelopment (ABR) Project. This is phase one of the Masterplan for the port up to 2040.

Currently the vast majority of cruiseships dock in Alexandra Basin (west and east). It is in the east basin, the larger of the two where Boudicca of 206m in length is berthed alongside Ocean Pier. This is also where larger cruiseships of 300m in length dock while considerably smaller ships can head downriver close to the city quays.

Port access issues such as restrictions on overall cruiseship dimensions will be resolved by an extensive dredging programme within the port but also the approach channels off Poolbeg Lighthouse.

This will enable the largest cruiseships in the world to dock following realignment of quays within Alexandra Basin. Such works will permit  these massive cruiseships up to 340m in length to swing around the increased turning circle inside the basin. 

Published in Cruise Liners

About the 29er Skiff Dinghy

The 29er is a one-design double-handed, single trapeze skiff for youth sailors.

There is an active class in Ireland, just one of the 38-countries from across all continents now racing the high-performance skiff.

The 29er is one of the latest dinghy classes to arrive in Ireland and has a 50/50 split between boys and girls.

The class like to describe the boat as "The most popular skiff for sailors who want to go fast!".

Derived from the Olympic class 49er class and designed by Julian Bethwaite the 29er was first produced in 1998.

Two sailors sail the 29er, one on trapeze.

The class is targeted at youth sailors aiming at sailing the larger 49er which is an Olympic class.


The 6.25-metre high rig features a fractional asymmetrical spinnaker; a self-tacking jib decreases the workload of the crew, making manoeuvres more efficient and freeing the crew to take the mainsheet upwind and on two-sail reaches.

The 15.00 m2 spinnaker rigging set-up challenges crews to be fit and coordinated, and manoeuvres in the boat require athleticism due to its lack of inherent stability and the high speed with which the fully battened mainsail and jib power up.

The 74kg weight hull is constructed of fibreglass-reinforced polyester in a foam sandwich layout.

The fully battened mainsail and jib are made from a transparent Mylar laminate with orange or red Dacron trimming, while the spinnaker is manufactured from ripstop Nylon.

The mast is in three parts - an aluminium bottom and middle section, with a polyester-fibreglass composite tip to increase mast bend and decrease both overall weights, and the capsizing moment a heavy mast tip can generate. Foils are aluminium or fibreglass.

About the ILCA/Laser Dinghy

The ILCA, formerly known as the Laser, is the most produced boat in the world, with 220,000 units built since 1971.

It's easy to see why the single-handed dinghy has won the title of the most widely distributed boat of all time.

The Laser is a one-design dinghy, the hulls being identical but three rigs that can be used according to the size and weight of the sailor.

The class is international, with sailors from 120 countries. The boat has also been an Olympic class since 1996, being both the men's and women's singlehanded dinghy.

Three rigs are recognised by the International Laser Class Association (ILCA):

  • ILCA 4: sail of 4.70m2
  • ILCA 6: sail of 5.76 m2
  • ILCA 7: sail of 7.06 m2

29er skiff technical specs

  • Hull weight 74kg (163lb)
  • LOA 4.45m (14.4ft)
  • Beam 1.77m (5ft 7in)
  • Crew 2 (single trapeze) 
  • Spinnaker area 15.00 m2 (181.2sq.ft)
  • Upwind sail area 12.5 m2 (142.0 sq.ft)
  • Mast length 6.25m (20.5ft)

Featured Sailing School

INSS sidebutton

Featured Clubs

dbsc mainbutton
Howth Yacht Club
Kinsale Yacht Club
National Yacht Club
Royal Cork Yacht Club
Royal Irish Yacht club
Royal Saint George Yacht Club

Featured Brokers

leinster sidebutton

Featured Webcams

Featured Associations

ISA sidebutton
ICRA
isora sidebutton

Featured Marinas

dlmarina sidebutton

Featured Chandleries

CHMarine Afloat logo
https://afloat.ie/resources/marine-industry-news/viking-marine

Featured Sailmakers

northsails sidebutton
uksails sidebutton
watson sidebutton

Featured Blogs

W M Nixon - Sailing on Saturday
podcast sidebutton
BSB sidebutton
wavelengths sidebutton
 

Please show your support for Afloat by donating