Menu

Ireland's sailing, boating & maritime magazine

Displaying items by tag: Phibsborough

Waterways Ireland has confirmed that work will begin on the Royal Canal to excavate and reline 410 metres of the canal that runs between Lock 6 and 7 in the Phibsborough/Cabra area. The work is key to keeping the Canal navigable for a range of boats and will also address seepage through the canal embankment adjacent to Shandon Gardens.

The work which requires the dewatering of the canal will remove sediment and rubbish deposits from the central navigation channel before the construction of a new impervious lining to the canal. All material removed from the canals will be transported to licensed disposal facilities. Restoration of the existing towpath walls will also be undertaken to heritage approved standards.

Environmental surveys have been undertaken in full compliance with the regulatory authorities along with the planned removal of all fish to be carried under licence before onsite work begins.
A Traffic Management Plan will be agreed with Dublin City Council and implemented to keep traffic disruption to a minimum. Works are due to be completed by year end.

To facilitate works, the Royal Canal will be closed to navigation from 19 September 2011. The towpath from Lock 6 to the Liffey Junction Bridge on the north side and the Shandon Park area on the south side of the Canal will be closed for the duration of the contract. Following consultation and agreement with residents, a temporary roadway and bridge will also be constructed to provide access for the Coke Oven Residents through Shandon Park. This access will be suitable for emergency vehicles.

An engineer will be full time in attendance for the duration of the contract to ensure that issues which arise are dealt with in a prompt and efficient manner. For further information on the project please visit the Waterways Ireland web site www.waterwaysireland.org and check out the 'Navigation Information, Planned Works' page.

Published in Inland Waterways

About the TP52 Racing Yacht

The TP52 racing yacht is a remarkable example of cutting-edge technology in the world of competitive yachting. Measuring 52 feet (15.85 metres) in length, this vessel is constructed entirely from carbon fibre, making it an incredibly light and agile craft.

The TP52 features a 6.25-metre high rig, complete with a fractional asymmetrical spinnaker and a self-tacking jib. This design reduces the workload of the crew, allowing for more efficient manoeuvres and freeing up the crew to focus on the mainsheet upwind and on two-sail reaches.

The spinnaker rigging set-up, measuring 15.00 m2, presents a challenge to even the most experienced crews, requiring them to be fit and perfectly coordinated. Maneuvering the boat requires athleticism due to the vessel's lack of inherent stability and the high speed generated by the fully battened mainsail and jib.

The TP52's hull is constructed of fibreglass-reinforced polyester in a foam sandwich layout, resulting in a weight of just 74kg. The fully battened mainsail and jib are made from a transparent Mylar laminate with orange or red Dacron trimming, while the spinnaker is manufactured from ripstop Nylon.

The mast is made up of three parts, featuring an aluminium bottom and middle section, with a polyester-fibreglass composite tip to increase mast bend and decrease overall weight. The capsizing moment, which can be generated by a heavy mast tip, is also reduced through this design. The TP52's foils are constructed from either aluminium or fibreglass, depending on the specific requirements of the vessel.

Overall, the TP52 racing yacht is an exceptional example of the latest advancements in yacht design and technology. Its lightweight construction, advanced rigging, and high-speed capabilities make it a top contender in the world of competitive yachting, challenging even the most skilled and experienced crews.