Menu

Ireland's sailing, boating & maritime magazine

Displaying items by tag: Liverpool Docks

Newly appointed Isle of Man Steam Packet MD says securing the Liverpool ferry route is vital.

As Manx Radio reports, the excessive cost of the new ferry terminal in Liverpool is worrying but will be worth it to secure the future of the Merseyside route.

That's the view of the Steam Packet Company's new managing director after it was announced an additional £13.8m is needed for the project.

It takes the spend to more than £52m - the construction is being overseen by the Department of Infrastructure rather than the ferry operator.

But Brian Thomson says all Manx residents have a right to be concerned. 

Click this link to listen to a podcast from the MD including news of the finally reopened Irish route to Dublin Port.   

Published in Ferry

#FERRY NEWS-Seatruck Progress (5,300 dwt) the new freight-only ro-ro, due to enter Seatruck Ferries Dublin-Liverpool service this month, as previously reported on Afloat.ie, sailed past Dublin Bay on Tuesday. She continued her overnight delivery voyage to arrive in Liverpool yesterday, fresh from German builders, FGS Flensburg, writes Jehan Ashmore.

As the newbuild approached Dublin Bay, she set a course to the east of the Burford Bank buoys where she continued her voyage to Liverpool, entering the Bootle docks through Langton Lock.

The Douglas registered ro-ro is to be joined by her fleetmate, Seatruck Power on the central corridor service next February. Each of the 21-knot quartet measure 142m long, have a beam of 24m and cater for 2,166 lane freight-metres with the use of an added upper fourth deck.

The increased capacity will enable un-accompanied trailer units to reach 70 on each of the sailings, which are currently served by smaller 'P' series ro-ro's Clipper Point and Clipper Pennant. These vessels were also commissioned by Seatruck from Spanish shipyards and entered servvice several years ago. 

Seatruck which is a subsidiary of the Danish-owned Clipper Group, is set to expand the fleet as the Irish Sea's only freight-only operator with  a futher  pair of the same class from FGS, which are due for delivery in the first-half of 2012. According to Seatruck, these newbuilds are likely to be deployed on the company's other Irish Sea routes.

Published in Ferry

Waszp sailing

The Waszp project was conceived in 2010 by Andrew McDougall, designer of the world-beating Mach 2 foiling Moth. 

The Waszp was created as a strict one-design foiler, where, as the class says “the true test when raced is between crews and not boats and equipment”.

The objective of the class rules is to ensure that this concept is maintained. Keeping possible modifications to a minimum ensures fair racing across the fleet, helps to reduce the overall cost to the sailor and reduces the amount of time in the workshop. 

The popularity of the WASZP has proven that the boat and the concept work. In October 2021, 1237 boats had been sold to over 45 countries. 

The top speed recorded on the foiling dinghy is 26.7 knots. 

60-95kgs+ is a weight range competitive across varied conditions with rigs knowns as ‘8.2’ and ‘6.9’.

The cost of a Moth dinghy in Europe is €14,400 inc VAT + shipping according to the manufacturers in October 2021.